INVT GD200A 160KW

INVT GD200A 160KW General Purpose Vector Drive Overview

The INVT GD200A 160KW General Purpose Vector Drive is designed for controlled operation of compatible three-phase asynchronous motors in commercial and industrial applications. The exact model is GD200A-160G/200P-4, with a rated output power of 160KW in its G-type configuration.

This drive manages motor speed, frequency and torque by converting the fixed-frequency AC supply into an adjustable-frequency output. Its DSP-based control system combines V/F control with sensorless vector control for applications requiring stable motor operation, controlled acceleration and better response to changing loads.

The invt gd200a platform is suitable for standard industrial transmission loads, including pumps, fans, air compressors, HVAC equipment, water-supply systems, plastic machinery and selected processing equipment. Buyers searching for invt gd200A should verify the complete model code because power rating, current capacity and installation requirements vary within the series.

Key Features and Benefits

The drive supports advanced open-loop vector control for applications that require better low-speed performance and motor response without installing a motor-speed encoder.

Rotating and static motor auto-tuning options help the installer match the drive’s control parameters with the connected motor. Rotating auto-tuning can be used when the motor can be separated from its load, while static auto-tuning supports installations where disconnecting the load is difficult.

Automatic voltage adjustment helps maintain stable output when the incoming grid voltage changes. Speed tracking allows the drive to restart a rotating motor smoothly, which is useful in fan, pump and other high-inertia applications.

Multiple frequency-setting methods are available, including digital settings, analogue inputs, pulse-frequency settings, multi-step speed operation, simple PLC control, PID settings and supported communication control.

A separate air-duct design helps prevent contaminants from entering sensitive electronic sections and supports more effective heat removal inside a properly designed control cabinet.

The drive includes a built-in C3 EMC input filter for industrial environments. An external C2 filter can be selected where the installation requires the corresponding IEC 61800-3 EMC performance level.

Best For

The INVT GD200A 160KW VFD is suitable for:

• Three-phase industrial water pumps
• Constant-pressure water-supply systems
• Ventilation and extraction fans
• HVAC motors
• Industrial air compressors
• Plastic manufacturing machinery
• Petroleum and oil-industry equipment
• Mining and coal-industry applications
• Water-circulation systems
• Compatible process motors
• Standard industrial transmission loads
• Applications requiring PID-based motor control
• Projects requiring adjustable motor speed and controlled acceleration

Final suitability depends on the motor nameplate, rated current, load torque, duty cycle, starting requirements and installation conditions.

Not Ideal For

This drive should not be selected only by matching the motor’s kW rating. It may not be suitable where:

• The motor requires a different operating voltage
• The motor’s rated current exceeds the drive’s applicable output rating
• A single-phase motor must be operated
• Only a single-phase AC supply is available
• Direct solar PV input or built-in solar MPPT operation is required
• The installation requires an outdoor enclosure without additional protection
• The environment cannot meet the drive’s ventilation and temperature requirements
• The connected load needs a different control or braking arrangement
• Frequent high-energy braking is required without a correctly selected external braking system

An enclosure with suitable environmental protection should be used where the VFD may be exposed to water, conductive dust or harsh industrial contaminants.

Power Input and Drive Operation

The GD200A-160G/200P-4 belongs to the three-phase 380VAC-class series. In its 160KW G-type configuration, the rated input current is 310A and the rated output current is 305A.

The permitted input-frequency range is 47Hz to 63Hz, covering standard 50Hz and 60Hz supplies. Output voltage can be adjusted from zero up to the available input-voltage level, while the output-frequency range extends from 0Hz to 400Hz.

The incoming supply, protection devices, isolator, contactor, reactor, cable size and earthing system must be selected according to the drive current, installation method and applicable electrical standards. A qualified industrial VFD technician should complete installation and commissioning.

This is an AC-input general-purpose VFD. Direct solar-panel connection and built-in MPPT operation are not part of this model’s verified functions.

Motor and Load Compatibility

The drive is intended for compatible three-phase asynchronous motors. Its 160KW rating should be considered together with the motor’s:

• Rated voltage
• Rated current
• Rated frequency
• Power rating
• Power factor
• Nominal speed
• Load-torque requirement
• Acceleration and deceleration time
• Starting conditions
• Operating duty
• Braking requirements

A simple power conversion places 160KW at approximately 215 mechanical horsepower. This is only an approximate conversion and does not replace motor nameplate matching. The 305A G-type rated output current is particularly important because motors with the same nominal kW rating can have different full-load currents and operating characteristics.

Long motor cables, elevated temperatures, high altitude, frequent starting, heavy overloads and high-inertia loads may require engineering adjustments or additional equipment.

Industrial Applications in Pakistan

The INVT GD200A 160KW is suitable for factories, commercial facilities, water systems and processing plants that operate large three-phase motors. Its adjustable-frequency output can regulate motor speed according to actual process demand instead of relying only on fixed-speed operation.

In water-supply projects, PID control and pressure feedback can support constant-pressure operation. Programmable relay outputs can also be used within an engineered multi-pump control arrangement.

For agricultural water pumping, the drive can control a compatible three-phase pump motor when a suitable AC supply is available. It is not a dedicated solar pump inverter, so a direct PV array should not be connected to its AC input.

In HVAC and ventilation systems, controlled acceleration can reduce mechanical shock during startup. Proper speed regulation can also help match airflow or water circulation to the operating requirement.

Protection and Control Features

The GD200A platform provides more than 30 fault-protection functions. Supported protection categories include:

• Overcurrent protection
• Overvoltage protection
• Undervoltage protection
• Overheating protection
• Input or output phase-loss protection
• Motor and drive overload protection
• Controlled acceleration to reduce overcurrent trips
• Controlled deceleration to reduce DC-bus overvoltage
• Automatic voltage adjustment
• Smooth restart of a rotating motor

The 160KW G-type overload capability includes 150% of rated current for one minute, 180% for ten seconds and 200% for one second.

An external braking unit and external braking resistor are required when dynamic braking is needed for this power class. Their ratings must be calculated from load inertia, braking torque, stopping time and braking frequency.

Technical Specifications

• Brand: INVT
• Series: Goodrive200A
• Product type: General Purpose Vector Control Drive
• Exact model: GD200A-160G/200P-4
• Target configuration: 160KW G type
• Input supply series: Three-phase 380VAC ±15%
• Rated input current: 310A in G-type configuration
• Rated output current: 305A in G-type configuration
• Input frequency: 50Hz or 60Hz
• Permitted input-frequency range: 47Hz to 63Hz
• Output voltage: 0V up to the input-voltage level
• Output frequency: 0Hz to 400Hz
• Control modes: V/F control and SVC
• Compatible motor type: Three-phase asynchronous motor
• Asynchronous motor speed ratio: 1:100
• Frequency-setting methods: Digital, analogue, pulse, multi-step speed, simple PLC, PID and communication settings
• Communication: MODBUS support and PROFIBUS communication setting
• Analogue inputs: Two 0–10V/0–20mA channels and one -10V to +10V channel
• Analogue outputs: Two 0–10V/0–20mA channels
• Digital inputs: Eight common inputs and one high-speed input
• Relay outputs: Two programmable relay outputs
• Ingress protection: IP20
• Cooling method: Air cooling
• Operating temperature: -10°C to 50°C
• Derating requirement: Derate above 40°C
• EMC filter: Built-in IEC 61800-3 C3 filter
• Optional EMC filter: External C2 filter
• Braking arrangement: Optional external braking unit and external resistor
• Mounting options for this power class: Wall or flange mounting
• Dimensions: 971 × 631 × 565mm
• Gross weight: 110kg
• Warranty: 1 Year Replacement Warranty by INVT Official

Installation and System Design Notes

The VFD needs adequate airflow and clearance inside the control panel. The cooling path must remain unobstructed, and the enclosure should be sized for the heat generated by the drive and other electrical equipment.

Use properly rated input protection, power cables, output cables, earthing conductors and control wiring. Signal cables should be separated from power cables to reduce electrical interference.

Motor cables that are unusually long may require an output reactor or filter. An input reactor or DC reactor may also be appropriate depending on the supply capacity, harmonics, line conditions and project requirements.

Acceleration, deceleration, current limits, motor parameters and protection values should be configured before regular operation. Factory-default settings should not be assumed to match every 160KW motor or mechanical load.

INVT GD200A 160KW Price in Pakistan

The current price of the INVT GD200A 160KW General Purpose Vector Drive in Pakistan is Rs. 775,750 per VFD.

Buyers comparing vfd price in pakistan or invt vfd price in pakistan should confirm the exact power rating and complete model number. The invt gd200a price can vary with exchange rates, shipment costs, quantity, optional reactors, braking equipment, filters and control-panel requirements. An invt gd200a price in pakistan enquiry should therefore identify the model as GD200A-160G/200P-4.

A positive listed price does not by itself confirm immediate stock availability. Contact Hajvery Solar before ordering to confirm availability and delivery requirements.

Hajvery Product Verification

Before accepting the VFD, verify the complete GD200A-160G/200P-4 model code on the unit and packaging. Confirm that the nameplate identifies the correct voltage class, G-type power rating and current capacity.

Check the enclosure, keypad, terminals, cooling system and packaging for transit damage. The serial details and supplied documentation should correspond with the physical unit. Installation should not begin if the product label is damaged, unreadable or inconsistent with the purchase order.

The invt vfd gd200a unit should be commissioned only after the connected motor and electrical supply have been checked.

Manual, Wiring Diagram and Parameter Resources

Use the correct invt gd200a manual and invt gd200a user manual for installation, terminal identification, commissioning and fault-code guidance. The document version should match the Goodrive200A series and the complete model code.

The invt gd200a wiring diagram should be checked before connecting the three-phase supply, motor, control terminals, relay outputs, braking equipment or communication wiring.

The appropriate invt gd200a parameter setting depends on the motor nameplate and application. Rated motor voltage, current, frequency, speed and power should be entered carefully before auto-tuning.

When searching for invt gd200a manual pdf, invt gd200a user manual pdf download, invt gd200 manual pdf download or invt drive gd200a manual, verify the document’s model coverage and revision before using its instructions.

Searches for invt vfd manual pdf free download, invt vfd gd200a manual pdf, invt inverter gd200a manual or manual inverter invt gd200a should lead to a genuine and readable manual. Avoid using parameter tables taken from an unidentified drive series.

The invt gd200a catalog is useful for general model selection, while the full user manual is required for detailed installation and commissioning. Anyone searching for invt vfd parameter setting pdf free download should confirm each setting against the connected motor and load instead of copying parameters from another installation.

Warranty and After-Sales Support

The INVT GD200A 160KW General Purpose Vector Drive comes with a 1-year replacement warranty under INVT official warranty coverage. Confirm the applicable claim requirements, required purchase documents and replacement process with Hajvery Solar before ordering.

The warranty does not remove the need for correct installation, environmental protection, motor matching and parameter configuration.

Before You Buy

Confirm the following information before placing an order:

• Exact drive model required
• Motor rated power
• Motor rated voltage
• Motor full-load current
• Motor phase and frequency
• Pump or machinery application
• Load-torque characteristics
• Starting and stopping requirements
• Braking frequency and load inertia
• Available three-phase supply
• Cable length between the VFD and motor
• Control method and communication requirement
• Panel cooling and ventilation
• Installation temperature and environment
• Need for input, DC or output reactors
• Need for an external braking unit and resistor
• Warranty claim requirements
• Current stock and delivery schedule

Frequently Asked Questions

How much motor power can the INVT GD200A 160KW operate?

The target G-type configuration is rated at 160KW with a rated output current of 305A. This equals approximately 215 HP by simple power conversion, but actual compatibility must be verified from the motor nameplate, current and load requirements.

Does this VFD support a three-phase motor?

Yes. It is designed for compatible three-phase asynchronous motors and requires an appropriate three-phase AC input supply.

Can it be connected directly to solar panels?

No direct solar PV input or MPPT function is verified for this general-purpose AC drive. A solar-powered installation would require a properly engineered power-conversion system. Solar panels should not be connected directly to its AC input terminals.

What is the output-frequency range?

The adjustable output-frequency range is 0Hz to 400Hz. The permissible operating frequency for the connected motor and machinery must still be observed.

Does it have a built-in braking unit?

This power rating requires an optional external braking unit when dynamic braking is needed. The braking resistor and unit must be sized for the application.

Where can I find the correct operating instructions?

Use a verified manual that covers the exact Goodrive200A model and revision. Do not copy wiring or settings from a different INVT drive family.

What is the INVT GD200A 160KW price in Pakistan?

The current price of the INVT GD200A 160KW General Purpose Vector Drive in Pakistan is Rs. 775,750 per VFD.

What warranty is available?

The VFD includes a 1-year replacement warranty from INVT Official. Confirm the documentation and claim procedure with Hajvery Solar before purchase.

Buy INVT GD200A 160KW VFD from Hajvery Solar

Order the INVT GD200A 160KW General Purpose Vector Drive from Hajvery Solar for industrial motor-control, pump, fan, HVAC and machinery applications in Pakistan. Share the motor nameplate, supply details and application requirements before ordering so the correct drive, protection devices and optional accessories can be selected.

Contact Hajvery Solar to confirm current availability, delivery and technical requirements.