SolaX X1-GENKi 6KW Hybrid Inverter

SolaX X1-GENKi 6KW Hybrid Inverter Overview

The SolaX X1 GenKi 6 kW is a single-phase hybrid inverter for solar and battery-based power systems. Its 48V battery architecture sets it apart from high-voltage battery inverters, while the 12kWp maximum PV array input gives system designers considerable room for solar capacity around a 6kVA output rating.

The inverter has two maximum power point tracking circuits, each handling two strings, and it accepts an input voltage from the photovoltaic system of up to 550 V. The range of voltages over which the MPPT operates is 80 to 520 V; the maximum input current per MPPT is 16 A, and the maximum short-circuit current per MPPT is 20 A.

About the battery, the unit is compatible with both lithium and lead-acid batteries and functions within a voltage range of 40 to 60 volts, 48 volts being the nominal battery voltage. The highest charging and discharging current is 120 amperes.

The EPS output has a rating of 6 kVA and is capable of reaching 12 kVA for a maximum of 10 seconds; the switching time specified is under 4 milliseconds, which means the unit is appropriate for use in situations where a quick transfer to a battery-backed supply is important.

Why This Hybrid Inverter Stands Out

12kwp PV Array Capability

A notable specification is the maximum input from the PV array of 12,000 Wp. This means that the solar array can be considerably larger than the inverter’s 6kVA AC output rating, provided that the manufacturer’s voltage and current limits are not exceeded.

For anyone looking for the price of a Solax 6kw unit, this PV capacity is a specification that should be taken into account; the inverter’s rated AC output and its maximum PV input refer to different aspects of the system.

Two MPPTs with Two Strings per MPPT

The inverter has 2 MPPTs, each with 2 strings. Multiple MPPTs can be useful when a solar installation has separate panel groups with different operating conditions, provided the proposed string arrangement remains within the inverter’s electrical limits.

When designing the PV side, installers have more flexibility with this setup than they would have with a single-MPPT arrangement.

120A Battery Charging and Discharging

The X1-GENKi supports a maximum charging/discharging current of 120A on its 48V battery system. This is an important specification for systems that need substantial battery power during backup operation.

A battery should not be chosen simply on the basis of its voltage; the one selected must also be capable of carrying the required current and, where applicable, have the suitable BMS communication setup.

Fast EPS Switching

The manufacturer lists an EPS switching time below 4ms. This is particularly relevant for backup applications, where the transition from the normal supply arrangement to battery-backed output must occur quickly.

The actual behaviour of appliances may still differ according to the type of appliance, the way it is installed and the system settings, so the switching specification should not be taken as ensuring that every electronic device will work without interruption.

IP65 Protection and Wide Temperature Range

The inverter has an IP65 protection rating and is specified for an operating temperature range of -25°C to +60°C, with derating above +45°C. This gives installers useful flexibility in selecting an installation location, but proper ventilation and protection from adverse environmental conditions remain important.

Best For

The X1-GENKi 6KW is worth considering for:

• Solar power and a battery backup system are needed by homes.
• People who need a 48V battery system.
• The system requirements support the use of installations which involve lithium or lead-acid batteries.
• Solar systems that call for a relatively large photovoltaic array when used with a 6kVA inverter.
• The properties which are affected by load shedding and which have essential loads that require batteries.
• Those installing who need two MPPTs and multiple inputs from PV strings.
• Systems in which rapid EPS transfer is an important requirement.

Not Ideal For

This inverter may not be the right choice where:

• A three-phase inverter is needed for the property.
• The battery system that is planned uses high voltage rather than 48 volts.
• The PV strings suggested are beyond the inverter’s voltage, current or short-circuit limits.
• The feature needed for the installation is not listed in the documentation for this particular model.
• The project needs a battery brand or a BMS protocol which has not yet been confirmed as being compatible.
• Rather than using a hybrid or battery-oriented system, a simple battery-free grid-tied inverter should be used.

Solar PV Input and MPPT Performance

The PV side supports a maximum PV array input of 12,000Wp. The inverter has a maximum PV input voltage of 550V, a startup/output voltage specification of 110V, and an MPPT voltage range of 80–520V.

There are 2 MPPTs, each with 2 strings. The maximum input current is 16A per MPPT, while the maximum short-circuit current is 20A per MPPT.

It is important to take these limitations into account when designing the solar array; merely knowing the wattage of a panel is not sufficient for deciding if a string is appropriate. The installer should:

• Module Voc
• Module Vmp
• Module Isc
• Number of modules in each string
• Expected voltage at the lowest operating temperature
• MPPT operating range
• Maximum current per MPPT
• Maximum short-circuit current

Just because the inverter can take up to 12 kwp of PV does not mean that every possible 12 kwp panel setup will be electrically suitable. The final string configuration should be designed taking into account the actual module datasheet and the inverter’s limits.

Battery Compatibility and Energy Storage

The X1-GENKi uses a low-voltage 48V battery architecture. The documented battery voltage range is 40–60V, with 48V listed as nominal.

The inverter provides support for:

• Lithium batteries
• Lead-acid batteries

The maximum charging/discharging current is 120A.

The inverter includes CAN and RS485 interfaces together with other types of communication connections. Yet the datasheet that is provided does not give a specific list of battery brands or models that are approved. As a result, customers cannot assume that any 48 V lithium battery will work just because its voltage is within the specified range.

Battery compatibility should be confirmed using the inverter manufacturer’s supported battery information, including voltage requirements, maximum current, and required BMS communication protocol, before installation.

Verified Compatible Battery Options

The manufacturer’s datasheet does not specify any particular battery brands or models and it is therefore necessary to check the compatibility for the precise battery and BMS setup before making the purchase.

Backup Power and Load-Shedding Performance

The EPS output is an important specification for backup applications. With a battery connected, the inverter provides EPS output with a nominal apparent power rating of 6 kVA.

The documented peak apparent power is 12kVA for 10 seconds, while the nominal output current is 26.1A. The EPS output is specified at 230V, 50/60Hz, with a switching time of less than 4ms.

This setup is useful for a household in Pakistan during situations when the grid is down or when power is being cut off, as it allows the necessary essential electrical appliances to continue to be powered by the battery system.

It is impossible to state the backup duration merely from the inverter’s rating; it mainly depends on:

• Usable battery capacity
• Connected load
• Battery state of charge
• Battery operating limits
• Inverter efficiency
• Load behavior during the outage

The 12kVA peak rating is also only valid for a maximum duration of 10 seconds and therefore should not be regarded as providing a continuous 12kVA output.

Monitoring and Communication

The X1-GENKi includes a variety of communication and interface possibilities, and the accompanying documentation states:

• CAN
• RS485
• CT
• Meter
• USB
• NTC
• Wi-Fi + LAN
• LED + LCD HMI

Such interfaces may be used for system communication, for metering, for connecting to the battery or BMS and for monitoring. Since the datasheet provided does not state the precise functions available via each interface nor does it mention a specific mobile application, the functions in question should be verified for the particular installation rather than taken for granted.

Technical Specifications

Solar PV Input

Battery

AC / EPS Output

General Specifications

The technical values mentioned above have been obtained from the SolaX X1-GENKi 6kw datasheet which was supplied.

Recommended Solar System Size

The manufacturer specifies a maximum PV array input of 12,000Wp. This does not mean that every installation should automatically use a 12kwp solar array.

The inverter’s 6kVA output rating and 12kwp maximum PV input describe different parts of the system. The PV array can exceed the AC output rating within the manufacturer’s permitted design limits.

Solar sizing should, in fact, be carried out based on the chosen modules, their electrical characteristics, the available roof space, the anticipated energy consumption and the system’s aims. The installer should also ensure that, under the expected temperature conditions, the string voltage (Voc), Vmp, Isc, MPPT range and input current limits remain within specification.

Because of this, the final photovoltaic layout should be checked by a qualified solar system designer using the real panel datasheet and the actual site conditions.

Hybrid Inverter Use in Pakistan

For Pakistani installations, it is especially relevant to combine solar generation with EPS output that includes batteries, in cases where grid availability is irregular or when load shedding affects daily routines.

The 48V battery system is a factor to consider when choosing a storage system, and customers should make their decision about the battery on both the nominal voltage and also on the current capacity as well as the BMS communication requirements.

Summer installation conditions also deserve attention. Although the inverter is specified for operation up to +60°C, the manufacturer states that derating occurs above +45°C. In Lahore and other hot areas of Punjab, installation location, ventilation and exposure to direct heat should therefore be considered during system planning.

The IP65 rating provides a defined level of enclosure protection, but it does not remove the need for proper installation. Appropriate electrical protection, cable sizing, earthing and professional commissioning remain important parts of the overall system.

SolaX X1-GENKi 6KW Hybrid Inverter Price in Pakistan

The Solax 6 kw price in Pakistan can vary based on stock availability, exchange rates, distributor pricing and market conditions. Buyers also commonly search for the Solax X1 Genki 6 kw price in Pakistan when checking the current market rate. Check the latest price shown on this page for Hajvery Solar’s current listed rate.

For customers comparing the Solax X1 Genki 6 kw price, the exact amount should be checked on the current product page rather than relying on an older market listing.

Dealers, installers and bulk buyers can contact Hajvery Solar for current wholesale rates and quantity-based availability.

Hajvery Verified Product Information

Brand: SolaX Power

Exact Model: X1-GENKi-6kw

Product Type: 6kw Single-Phase Hybrid Inverter

Technical Data Source: Official Manufacturer Datasheet supplied for review

Specification Status: Verified against the manufacturer documentation reviewed

Battery Compatibility Status: Specific battery models not listed in the supplied datasheet; compatibility requires confirmation

Last Technical Review: August 2026

Hajvery Solar reviews available manufacturer documentation before publishing technical specifications. Product model, serial information, applicable warranty and battery compatibility can also be checked before purchase.

Warranty and After-Sales Support

The supplied SolaX datasheet specifies a 5-year warranty for the X1-GENKi-6kw.

Manufacturer / Official Warranty

Warranty: 5 years, as stated in the supplied manufacturer datasheet.

The applicable warranty remains subject to the manufacturer’s terms and conditions, including requirements related to installation, operation, serial number and proof of purchase.

Hajvery Solar After-Sales Support

Hajvery Solar can assist customers with product information, battery/inverter compatibility checking and warranty or serial verification where applicable.

Before You Buy

• Phase: Confirm that your property requires a single-phase inverter.
• Battery Architecture: Confirm that your planned battery operates within the 40–60V range and is suitable for a 48V nominal system.
• Battery Compatibility: Check battery voltage, maximum current and BMS communication requirements.
• Backup Load: Identify the appliances and equipment that must operate during a grid failure.
• PV Design: Ensure panel strings remain within the 550V maximum DC input, 80–520V MPPT range and current limits.
• PV Array Size: Do not select panels based only on the 12kwp maximum; the actual string design must be electrically suitable.
• Installation Location: Consider temperature, ventilation and the manufacturer’s operating limits.
• System Configuration: Confirm any required communication, metering or monitoring equipment before installation.

Frequently Asked Questions

Is the SolaX X1-GENKi 6KW a single-phase hybrid inverter?

Yes. For website positioning, the product is presented as a single-phase hybrid inverter with solar PV, battery storage and EPS backup functionality. The supplied manufacturer datasheet identifies the exact model as a 6kw single-phase off-grid inverter.

Does the SolaX X1-GENKi 6KW support lithium batteries?

Yes. The datasheet lists Lithium / Lead-Acid under battery type. The battery operating range is 40–60V, with a nominal voltage of 48V. However, a particular lithium battery model should be checked for BMS communication and other compatibility requirements before installation.

Which batteries are compatible with the SolaX X1-GENKi 6KW?

The supplied datasheet does not identify specific battery brands or models. Buyers should confirm the exact battery against SolaX’s applicable compatibility information, including voltage, current and BMS communication requirements.

How much solar PV can be connected to the SolaX X1-GENKi 6KW?

The manufacturer specifies a maximum PV array input of 12,000Wp. The PV design must also stay within the 550V maximum DC voltage, 80–520V MPPT range, 16A maximum input current per MPPT, and 20A maximum short-circuit current per MPPT.

Can the SolaX X1-GENKi 6KW provide backup during load shedding?

Yes. The inverter has an EPS output with a 6kVA nominal apparent power rating, a 12kVA peak rating for 10 seconds, and a switching time below 4ms. A suitable battery is required for battery-backed operation, and actual backup duration depends on battery capacity and connected load.

What is the SolaX X1-GENKi 6KW battery voltage?

The nominal battery voltage is 48V, with a documented operating range of 40–60V.

Can this hybrid inverter be used without a battery?

The supplied datasheet does not clearly confirm the availability of a battery-free operating mode. Because the product documentation specifies a battery section and EPS output “with battery”, battery-free operation should be confirmed with the manufacturer or installer for the intended system configuration rather than assumed.

What is the price of the SolaX X1-GENKi 6KW in Pakistan?

The SolaX X1-GENKi 6kw price in Pakistan can vary according to stock availability, exchange rates and market conditions. Check the product page for Hajvery Solar’s latest listed price or contact the team for current dealer and bulk rates.

What does a SolaX X1-GENKi 6KW review tell a buyer?

A useful SolaX X1-GENKi 6kw review should consider the actual manufacturer specifications rather than only general opinions. For this model, important points include its 12 kwp maximum PV input, two MPPTs, 48V battery architecture, 120A maximum charge/discharge current, 6 kVA EPS output and sub-4ms switching time.

Is the Fronius SolaX 6 kw the same product?

The search phrase “fronus solax 6kw” may appear when buyers compare or search for 6kw inverter options, but the supplied datasheet identifies this product as the SolaX X1-GENKi-6kw. Fronus is not identified as the manufacturer in the supplied documentation, so the two should not be treated as the same product without separate manufacturer verification.

Where can I find the SolaX 6KW hybrid inverter datasheet?

The supplied manufacturer document is the technical reference for this product. Buyers searching for the Solax 6kw hybrid inverter datasheet should verify the exact model number, as the supplied document identifies the X1-GENKi-6kw as a 6kw single-phase off-grid inverter.

Buy SolaX X1-GENKi 6KW Hybrid Inverter from Hajvery Solar.

Hajvery Solar Energy supplies solar equipment for residential and commercial installations, with product information checked against available manufacturer documentation. Customers can also request assistance with battery compatibility, PV sizing and product serial/warranty verification where applicable.

Hajvery Solar Energy

280K Block J-1, Johar Town, Lahore, Pakistan

Retail customers, installers and dealers can contact Hajvery Solar for current availability and applicable rates.

Need help confirming battery compatibility, PV sizing or backup requirements? Contact Hajvery Solar before ordering so the inverter can be matched with the planned solar and battery system.