itel 6KW Hybrid Inverter Overview

The itel 6KW Single Phase Hybrid Inverter is built for solar systems where PV generation, battery storage, grid electricity and backup loads need to work together. The inverter delivers 6000W nominal output through a single-phase AC connection and accepts up to 7500W of solar PV input, giving the system useful room for a larger solar array.

The system’s 48V battery setup is compatible with both lead-acid and lithium-ion batteries and has a battery operating voltage range of 40 to 60 volts. Charging and discharging capacities of the battery can each reach 120 amperes, which means the inverter is appropriate for use in systems that need a large amount of battery power when operating in backup mode.

On the solar side the inverter has two MPPT tracers, operates within an MPPT voltage range of 150 to 450 volts and has a maximum DC input voltage of 500 volts; it also offers generator support, smart load support, as well as communication via Wi-Fi/RS485/CAN and comes with IP66 protection. Because of these features it is especially suitable for users in Pakistan who need a single-phase hybrid system with a good amount of PV capacity and battery backup.

Why This Hybrid Inverter Stands Out

7,500W Maximum PV Input

The inverter can take in up to 7,500W of power from a photovoltaic system while supplying 6kW of AC output. It is therefore possible to install a solar array with a capacity greater than the inverter’s nominal AC output as long as it stays within the specified PV limit. However, the final design of the panel strings must still comply with the inverter’s voltage and current limitations.

120A Battery Charging and Discharging

The fact that the maximum charging current and maximum discharging current are both 120A means that the battery has strong capability from the battery side. This is useful since the system needs to charge the battery efficiently from the available solar and grid sources and at the same time supply a large amount of battery power to the backup loads.

10ms Backup Switching

The 10ms switching time stated for the backup output means that the inverter can be used for essential domestic or certain commercial loads in cases where a quick switch to backup power is important.

IP66 Protection

The inverter carries an IP66 ingress protection rating, providing a strong level of protection against dust and water exposure. Installation should still follow proper mounting, ventilation and electrical-protection requirements.

Generator and Smart Load Support

The inverter allows for the integration of diesel generators and provides smart load support, which gives designers more choices when arranging systems in response to varying energy sources and load demands.

Best For

The itel 6KW SP-HYBRID Hybrid Inverter is a practical choice for:

• Homes requiring battery backup during load shedding
• Solar systems with a single-phase electrical connection
• Users planning a 48V lithium-ion or lead-acid battery system
• The installations that require up to 7.5 kW of PV input
• Homes with daytime solar consumption and evening battery use
• Systems where generator support is required
• Users who need fast backup switching
• Installers working on medium-sized residential or selected small commercial hybrid systems

Not Ideal For

This inverter may not be the right choice when:

• The property requires a three-phase inverter rather than a single-phase system.
• The planned battery operates outside the 40–60V battery range.
• The solar array exceeds the inverter’s 7,500W maximum PV input or electrical input limits.
• The project requires a high-voltage battery architecture rather than a 48V-class battery system.
• The required load is beyond the inverter’s continuous and backup electrical limits.
• The installation requires a battery brand or communication protocol that has not been confirmed for compatibility.

Solar PV Input and MPPT Performance

The section dealing with solar input can handle a maximum PV input power of 7,500W, which means the inverter has the capacity to accommodate a relatively large solar array compared to its 6kW AC rating.

The inverter is equipped with two MPPT trackers, having an MPPT voltage range of 150 to 450 volts and a 125-volt startup voltage; its highest DC input voltage is 500 volts and the maximum input current is 18 amperes per MPPT.

When installing the systems, technicians should take the limits into account whenever they are choosing the panels and laying out the strings. The panel specifications regarding Voc, Vmp, Isc and Imp must be compared with the inverter’s voltage and current limits and attention should also be paid to the voltage changes caused by temperature when finalising the string configuration.

Battery Compatibility and Energy Storage

The inverter is based on a 48V nominal battery system with an operating voltage range of 40 to 60V.

The kinds of batteries that are supported are lead-acid, lithium-ion, and those that the user defines. This provides the installer with a certain degree of flexibility, but the battery chosen must still satisfy the inverter’s requirements regarding voltage, current, and communication.

The inverter can provide a maximum MPPT charging current of 120A, a mains/generator charging current of 120A, and a maximum discharging current of 120A.

The communication interfaces are CAN and RS485, interfaces which are used for battery management and for system communication where the selected battery provides for them.

Before installing them, the correct battery brands or models must be selected on the basis of their voltage requirements, BMS communication protocol, cable and pin configuration, and compatibility needs.

Backup Power and Load-Shedding Performance

For people in Pakistan one of the principal benefits of a hybrid inverter is that it enables them to use the energy stored in batteries when grid power is not available.

The 6KW SP-HYBRID hybrid inverter has a nominal backup output of 6000W and a maximum apparent power of 6000VA; its backup output can reach a peak power of 12000VA for up to 15 seconds, the specified backup switching time being 10ms.

The inverter can therefore be used for certain essential loads, on the condition that the appliances connected to it do not exceed the inverter’s continuous output, peak capability and battery limitations.

Appliances with a high starting current, such as pumps, refrigerators, compressors and motors, should be assessed on the basis of their actual starting and running requirements and not just by reference to their wattage.

Generator and Smart Load Support

The inverter supports diesel generator integration, allowing generator power to form part of a broader hybrid energy setup.

It also supports smart load control, which can help installers manage selected loads according to system operating conditions. The actual smart-load configuration should be designed around the connected equipment and the inverter’s installation requirements.

Parallel Operation and System Expansion

The inverter supports parallel operation for up to 12 units. This can provide a path for system expansion where a single inverter is not sufficient for the required project capacity.

Parallel systems need to be correctly configured, have wiring that is compatible and be properly protected. The entire system must be designed in accordance with the inverter’s installation requirements rather than just adding units without any system-level planning.

Monitoring and Communication

The inverter provides several communication options, including:

• Wi-Fi
• RS485
• CAN
• Dry Contact

The interfaces are able to provide system monitoring, battery communication and control functions according to the equipment that is connected and the final installation configuration.

In the case of a hybrid solar system, it is especially important to ensure proper communication when connecting a battery with a BMS. The communication settings should be verified during the commissioning process.

Technical Specifications

Solar PV Input

Battery

AC/Grid Output

Backup Output

General Specifications

Recommended Solar System Size

The inverter has a 6kW rated AC output and accepts up to 7,500W maximum PV input. These are two different design limits.

A solar array can therefore be designed up to the PV input limit, but the actual number of panels will depend on the Voc, Vmp, Isc and Imp of the module in question together with the inverter’s MPPT voltage and current limits.

When designing the string it is necessary to take into account the maximum DC input voltage of 500 V, the MPPT operating voltage range from 150 to 450 V and the input current of 18 A per MPPT, as well as to include the Voc increase in cold weather and the actual conditions existing at the site during the engineering check.

Hybrid Inverter Use in Pakistan

Battery-powered solar systems are useful for Pakistani households in order to keep certain essential electrical appliances running due to load shedding and changes in the power grid’s availability.

The itel 6KW SP-HYBRID Hybrid Inverter can combine daytime solar production with battery storage and grid electricity. During periods of available sunlight, solar energy can support connected loads and charge the battery within the system’s configured limits. When grid power is unavailable, the backup output can supply suitable loads from the available battery energy.

It is still important to ensure good installation. The inverter must have adequate electrical protection, be correctly earthed, have properly sized cables and enjoy sufficient ventilation. Even though the inverter has an IP66 rating, the environment in which it is installed should still meet the correct mounting and operating requirements.

Pakistan’s high summer temperatures also make temperature management important. The stated operating range is -25°C to +60°C, with power derating applicable at higher operating temperatures. The installation should therefore avoid unnecessary heat buildup and maintain suitable airflow around the equipment.

itel 6KW SP-HYBRID Hybrid Inverter Price in Pakistan

The itel 6KW SP-HYBRID Hybrid Inverter is positioned for buyers searching for itel 6kw price in pakistan, itel 6kw price and itel 6kw hybrid inverter price in pakistan.

The current price is Rs. 200,000 per unit.

For buyers searching for itel 6kw, itel 6kw inverter or itel 6kw pro hybrid inverter, the important buying step is to verify the exact model IHY-6KL1A before ordering. This prevents confusion between different 6kW inverter variants.

Buyers searching for itel 6kw single phase hybrid solar inverter price in pakistan can use the same exact model identification when checking the current offer. Dealers and installers can contact Hajvery Solar Energy for availability and quantity-based enquiries.

Hajvery Solar Energy is an itel Official Distributor, providing buyers with a direct route for product and warranty guidance.

Search Information for Datasheet and Manual Queries

The exact model associated with this product is IHY-6KL1A. Buyers searching for itel 6kw datasheet can use this model number when checking technical information.

For users searching itel 6kw pro inverter datasheet, it is important to match the exact product model before using any specifications for system design.

Similarly, buyers looking for an itel 6kw single phase hybrid solar inverter user manual or itel 6kw single phase hybrid solar inverter manual should match the manual to IHY-6KL1A rather than relying only on the 6kW capacity.

IP Rating Search Clarification

Some buyers may search for itel 6kw ip54 inverter price in pakistan or itel 6kw ip54 hybrid inverter price in pakistan. This product has an IP66 ingress protection rating, so IP54 is not the protection rating of this model.

Likewise, if someone searches for itel 6kw hybrid inverter ip65 price in pakistan, this model is IP66, not IP65.

For buyers specifically searching itel 6kw ip66 inverter price in pakistan, the IP66-rated IHY-6KL1A is the relevant product identification.

Hajvery Verified Product Information

As an itel authorized dealer, Hajvery Solar Energy can help buyers check the inverter model, battery requirements and system compatibility before purchase.

Warranty and After-Sales Support

The itel 6KW SP-HYBRID Hybrid Inverter comes with a 5-year replacement warranty and a separate 5-year service warranty.

Hajvery Solar Energy is an Official itel Distributor, providing customers with a clear route for product-related guidance and warranty support.

Buying through Hajvery Solar Energy, an authorized itel dealer, also gives buyers an opportunity to confirm the exact inverter model, battery requirements and installation considerations before purchase.

Warranty claim requirements and applicable conditions should be confirmed with Hajvery Solar Energy before ordering.

Before You Buy

Before purchasing the itel 6KW SP-HYBRID Hybrid Inverter, check these points:

• Confirm that your property uses a single-phase electrical system.
• Confirm the battery is compatible with the 48V / 40–60V operating range.
• Check the battery’s maximum charge and discharge current.
• Confirm the planned PV array remains within the 7,500W maximum PV input.
• Check panel Voc, Vmp, Isc and Imp against the inverter’s limits.
• Confirm the required backup loads and their starting currents.
• Check whether generator integration is required.
• Confirm the required BMS communication for lithium battery installations.
• Ensure suitable protection, earthing, cabling and ventilation are included in the installation.
• Confirm the applicable 5-year replacement warranty and 5-year service warranty before purchase.

Frequently Asked Questions

What is the itel 6KW hybrid inverter?

The itel 6KW SP-HYBRID Hybrid Inverter is a single-phase hybrid inverter with a 6000W rated output. It integrates solar PV, battery storage, grid power and backup operation.

What is the itel 6kw price in pakistan?

The current price is Rs. 200,000 per unit. Availability and quantity-based pricing should be confirmed with Hajvery Solar Energy.

What is the maximum PV input of the itel 6KW inverter?

The inverter supports up to 7500W maximum PV input power.

Is the itel 6KW inverter single phase?

Yes. The IHY-6KL1A is a single-phase hybrid inverter with a 6000W nominal output.

What battery does the itel 6KW hybrid inverter use?

The inverter supports lead-acid, lithium-ion and user-defined battery types. Its nominal battery voltage is 48V, with an operating range of 40–60V.

How much charging current does the inverter support?

The maximum MPPT charging current is 120A, while the maximum mains/generator charging current is also 120A. Maximum battery discharge current is 120A.

Is the itel 6KW inverter IP66?

Yes. The inverter has an IP66 ingress protection rating. Therefore, searches for itel 6kw ip66 inverter price in pakistan correspond to the product’s stated protection rating, while IP54 and IP65 are not the rating of this model.

Does the itel 6KW hybrid inverter support a generator?

Yes. Diesel generator support is included, allowing generator integration into a suitable hybrid energy system.

What is the backup switching time?

The specified backup switching time is 10ms.

Does the inverter support parallel operation?

Yes. The inverter supports parallel operation for up to 12 units, subject to correct system configuration and installation requirements.

What warranty does the itel 6KW hybrid inverter have?

The product has a 5-year replacement warranty and a separate 5-year service warranty. Applicable claim requirements should be confirmed before purchase.

Buy itel 6KW SP-HYBRID Hybrid Inverter from Hajvery Solar

Choose Hajvery Solar Energy for the itel 6KW SP-HYBRID Hybrid Inverter with model verification, battery compatibility guidance and practical system-planning support.

Hajvery Solar Energy is an itel authorized dealer and an Official itel Distributor. Customers can contact the team to confirm availability, product details, warranty requirements and installation compatibility before purchase.