Solis 6KW L-PLUS Hybrid Inverter

Solis 6KW L-PLUS Hybrid Inverter Overview

The Solis S6-EH1P6K-L-PLUS is a single-phase low-voltage energy storage inverter with a rated AC output power of 6 kW. It is part of the S6-EH1P(3-8)K-L-PLUS series and is designed to work with solar PV, batteries, the grid and backup loads. The inverter supports both Li-ion and lead-acid batteries with a battery voltage range of 40–60 V.
For buyers searching for solis 6kw plus, the exact model covered on this page is S6-EH1P6K-L-PLUS. The available solis 6kw plus datasheet identifies the 6 kW model within the S6-EH1P(3-8)K-L-PLUS series. The inverter supports a recommended maximum PV array size of 12 kW, with maximum usable PV input power of 9.6 kW. It uses 2 MPPTs and supports up to 4 input strings.

The inverter also supports generator connection and multiple inverters can operate together to form a microgrid. It provides dual backup ports for intelligent control of critical and non-critical loads.

Why This Hybrid Inverter Stands Out

High Solar PV Input Capacity

The manufacturer specifies a recommended maximum PV array size of 12 kW for the 6 kW model, while maximum usable PV input power is 9.6 kW. This gives system designers clear manufacturer limits when planning the solar array.

The maximum DC input voltage is 500 V, with a startup voltage of 90 V and an MPPT voltage range of 90–435 V.

This information is also relevant for buyers comparing the solis 6kw price, because the inverter’s rated output and PV input capability are important when evaluating a hybrid system.

Multiple MPPTs

The inverter has 2 MPPTs and supports up to 4 input strings. The manufacturer specifies maximum input current of 32 A / 32 A and maximum short-circuit current of 40 A / 40 A.

Multiple MPPTs can be useful when a solar system uses more than one PV input arrangement, subject to the final system design and the manufacturer’s voltage and current limits.

Strong Battery Charging and Discharging

The inverter supports Li-ion and lead-acid batteries within a 40–60 V battery voltage range. For the 6 kW model, the maximum charge/discharge power is 6 kW and the maximum charge/discharge current is 135 A. CAN and RS485 communication are specified for the battery connection.

For users researching solis 6kw battery requirements, the important documented points are the 40–60 V battery range, supported battery types, 6 kW maximum charge/discharge power and 135 A maximum charge/discharge current.

Fast Backup Switching

The backup output is rated at 6 kW, while the manufacturer specifies maximum apparent backup output power of two times the rated power for 10 seconds. The backup switch time is less than 4 ms.

This fast switching time is relevant for users who want the inverter to transfer connected backup loads quickly when grid power is unavailable.

Generator Integration

The S6-EH1P(3-8)K-L-PLUS series is generator-compatible. The manufacturer provides a dedicated generator input specification, with the 6 kW model listed with 6 kW maximum input power.

Dual Backup Ports

The inverter supports dual backup ports for intelligent control of critical and non-critical loads. This allows the backup system to distinguish between loads according to their backup requirements.

Best For

The Solis S6-EH1P6K-L-PLUS is particularly relevant for:

• Single-phase solar systems requiring a 6 kW inverter output.
• Systems using low-voltage batteries.
• Installations requiring battery backup.
• Solar systems where generator compatibility is required.
• Systems requiring separate control of critical and non-critical backup loads.
• Solar installations with a recommended PV array capacity of up to 12 kW, within the manufacturer’s electrical limits.

The solis 6kw model is therefore relevant to buyers looking for a single-phase 6 kW low-voltage hybrid inverter rather than a three-phase system.

Not Ideal For

This inverter may not be appropriate for:

• Three-phase installations requiring a three-phase inverter.
• Systems requiring an HV battery architecture, as the specified battery voltage range is 40–60 V.
• Solar arrays that exceed the manufacturer’s specified PV voltage, current or power limits.
• Installations where the required inverter output is greater than the rated 6 kW output.
• Systems requiring battery brands or models that have not been confirmed as compatible with this exact inverter through manufacturer documentation.

The supplied documentation identifies the product as the S6-EH1P6K-L-PLUS. It does not identify a separate solis 6kw pro model, so that product name should not be treated as the exact model covered by this page.

Solar PV Input and MPPT Performance

The 6 kW model has a recommended maximum PV array size of 12 kW and maximum usable PV input power of 9.6 kW. Maximum input voltage is 500 V, while the rated voltage is 330 V. Startup voltage is 90 V and the MPPT voltage range is 90–435 V.

The inverter provides 2 MPPTs and supports up to 4 input strings. Maximum input current is specified as 32 A / 32 A, with maximum short-circuit current of 40 A / 40 A.

These figures should be considered when designing the PV array. Final string design must remain within the inverter’s specified voltage and current limits and should take the solar module Voc, Vmp, Isc, operating temperature and string arrangement into account.

For customers researching a solis 6kw hybrid inverter datasheet pdf, these PV specifications are among the key figures to review before system design.

Battery Compatibility and Energy Storage

The inverter uses a low-voltage battery architecture with a specified battery voltage range of 40–60 V. The manufacturer lists both Li-ion and lead-acid battery types.

For the 6 kW model, maximum charge/discharge power is 6 kW and maximum charge/discharge current is 135 A. Battery communication is provided through CAN and RS485.

The available datasheet does not provide a verified list of specific compatible battery brands or models. Therefore, a specific battery brand should not be considered confirmed from this documentation alone.

Battery compatibility should be confirmed against the inverter manufacturer’s supported battery list, voltage requirements and BMS communication protocol before installation.

Backup Power and Load-Shedding Performance

The backup output is rated at 6 kW. The manufacturer specifies maximum apparent backup output power of two times the rated power for 10 seconds, while backup switching time is less than 4 ms.

The backup output uses L/N/PE with a rated output voltage of 220 V / 230 V and a rated frequency of 50 Hz / 60 Hz. The 6 kW model has a rated backup output current of 27.3 A / 26.1 A.

The inverter also provides dual backup ports for intelligent control of critical and non-critical loads. This can be useful where some appliances need backup power while other loads do not.

Actual backup duration depends on the usable battery capacity, connected load, battery state of charge, inverter efficiency and battery operating limits.

Monitoring and Communication

The inverter includes a 7.0-inch LCD display along with Bluetooth and an APP. Communication interfaces include RS485 and CAN, with Wi-Fi, GPRS and LAN listed as optional communication options.

The battery communication system supports CAN and RS485, while the display and APP provide the documented user interface and monitoring options.

Technical Specifications

Solar PV Input

Battery

AC / Grid Output

Backup / EPS Output

General Specifications

Recommended Solar System Size

The manufacturer specifies a recommended maximum PV array size of 12 kW for the 6 kW model, with maximum usable PV input power of 9.6 kW.

The 6 kW figure refers to the inverter’s rated AC output, while the 12 kW figure refers to the recommended maximum PV array size. These are different specifications and should not be treated as the same value.

Actual PV system design must remain within the manufacturer’s maximum DC voltage, MPPT voltage range, input-current and short-circuit-current limits. Solar module Voc, Vmp, Isc, operating temperature and string arrangement should all be considered before installation.

Final system sizing should be confirmed by a qualified installer or system designer.

Hybrid Inverter Use in Pakistan

For Pakistani solar installations, the backup capability of a hybrid inverter is particularly relevant where grid availability is inconsistent. This model provides a 6 kW backup output, less than 4 ms backup switching and dual backup ports for critical and non-critical loads.
Its 40–60 V battery range supports low-voltage battery systems, while both Li-ion and lead-acid batteries are specified by the manufacturer. The 135 A maximum charge/discharge current is also relevant when designing the battery side of a 6 kW system.

For installations in Punjab and Lahore, the inverter’s specified operating ambient temperature range of -40 to +60°C and IP66 protection rating are important specifications to consider when selecting the installation location. Proper installation, ventilation and protection equipment should still be considered as part of the overall system design.

Solis 6KW Plus Hybrid Inverter Price in Pakistan

The solis 6kw plus price in pakistan is PKR 215,000.

The current product price for the Solis S6-EH1P6K-L-PLUS is PKR 215,000 in Pakistan. This price applies to the product listed on this page.

For customers checking the solis 6kw plus price, the listed price is PKR 215,000.

The solis 6kw inverter price is PKR 215,000, while the solis 6kw price in pakistan is also PKR 215,000 for this listed product.

Dealers, installers and bulk buyers can contact Hajvery Solar for current wholesale rates and quantity-based availability.

Hajvery Verified Product Information

Brand: Solis

Exact Model: S6-EH1P6K-L-PLUS

Product Type: Hybrid Solar Inverter

Technical Data Source: Official Manufacturer Documentation

Specification Status: Verified against the manufacturer documentation reviewed

Battery Compatibility Status: Specific battery brands/models require compatibility confirmation

Price: PKR 215,000

Warranty: 5-year replacement warranty in Pakistan

Last Technical Review: August 2026

Hajvery Solar reviews available manufacturer documentation before publishing technical specifications. Product model, serial information, applicable warranty and battery compatibility can also be checked before purchase.

Warranty and After-Sales Support

Warranty: 5-year replacement warranty in Pakistan.

The Solis 6KW Plus Hybrid Inverter comes with a 5-year replacement warranty in Pakistan. This provides customers with a defined five-year replacement warranty for the product.

Hajvery Solar After-Sales Support: After-sales assistance and warranty/serial verification support are available as part of the supplied Hajvery Solar business information.

Before purchase, customers should confirm the applicable warranty process, required proof of purchase, product serial number and any installation or operating conditions that apply to the warranty.

Before You Buy

1. Phase: Confirm that the property requires a single-phase inverter.
2. Battery Architecture: Confirm that the planned battery system operates within the specified 40–60 V range.
3. Backup Load: Determine which appliances or equipment need to operate during grid failure.
4. PV Design: Ensure the proposed solar array remains within the inverter’s voltage, current and power limits.
5. Battery Compatibility: Confirm battery voltage, maximum current and BMS communication compatibility.
6. Generator Requirement: Confirm whether generator integration is required for the system.
7. Future Expansion: Consider whether multiple inverters or microgrid operation may be required.
8. Installation Location: Check the operating temperature, IP66 protection and installation requirements before selecting the mounting location.
9. Price: The listed product price is Rs. 215,000.
10. Warranty: The product comes with a 5-year replacement warranty in Pakistan.

Frequently Asked Questions

Is the Solis 6KW Plus Hybrid Inverter single-phase or three-phase?

It is a single-phase inverter with L/N/PE operation. The rated grid voltage is 220 V / 230 V.

Does the Solis 6KW Plus Hybrid Inverter support lithium batteries?

Yes. The manufacturer specifies both Li-ion and lead-acid battery support, with a battery voltage range of 40–60 V.

Which batteries are compatible with the Solis 6KW Plus Hybrid Inverter?

The supplied datasheet does not provide a specific list of compatible battery brands or models. Battery compatibility should therefore be confirmed using the manufacturer’s supported battery documentation, voltage requirements and BMS communication requirements.

How much solar PV can be connected to the Solis 6KW Plus Hybrid Inverter?

The manufacturer specifies a recommended maximum PV array size of 12 kW and maximum usable PV input power of 9.6 kW for the 6 kW model.

Can the Solis 6KW Plus Hybrid Inverter provide backup during load shedding?

Yes. The inverter has a rated backup output power of 6 kW and a backup switch time of less than 4 ms. It also supports dual backup ports for control of critical and non-critical loads.

Does the Solis 6KW Plus Hybrid Inverter support a generator?

Yes. The manufacturer describes the PLUS series as generator-compatible and provides a dedicated generator input specification.

What is the Solis 6KW Plus Hybrid Inverter price in Pakistan?

The solis 6kw plus price in pakistan is PKR 215,000.

What is the solis 6kw plus price?

The listed solis 6kw plus price is PKR 215,000.

What is the solis 6kw inverter price?

The listed solis 6kw inverter price is PKR 215,000.

What is the solis 6kw price in pakistan?

The listed solis 6kw price in pakistan is PKR 215,000.

What warranty is available?

The Solis 6KW Plus Hybrid Inverter comes with a 5-year replacement warranty in Pakistan.

Is there a solis 6kw plus manual?

The supplied file is the official manufacturer datasheet for the S6-EH1P(3-8)K-L-PLUS series. A separate solis 6kw plus manual was not supplied with the source files, so no manual-specific information has been added.

Similarly, the available source identifies the product as S6-EH1P6K-L-PLUS and does not provide separate technical information for a product called solis 6kw l plus beyond this exact model designation.

Buy Solis 6KW Plus Hybrid Inverter from Hajvery Solar

Hajvery Solar Energy supplies genuine/original solar products and provides after-sales support, battery/inverter compatibility checking, datasheet verification and product serial/warranty verification. The Solis 6KW Plus Hybrid Inverter is available at PKR 215,000 with a 5-year replacement warranty in Pakistan. Retail and dealer/wholesale sales are available according to the supplied business information.

Hajvery Solar Energy
280K Block J-1, Johar Town, Lahore, Pakistan

Need help confirming battery compatibility, PV sizing or backup requirements? Contact Hajvery Solar before ordering so the inverter can be matched with the planned solar and battery system.