OSDA 585W Bifacial Solar Panel

OSDA 585W N-Type Bifacial Solar Panel Overview

The OSDA 585W N-Type Bifacial Solar Panel is a high-output module for buyers who need strong power density and rear-side energy-generation potential. The exact model is ODA585-28V-MHD. It combines 110 N-Type bifacial monocrystalline half cells with an 18-busbar SMBB layout and dual-glass construction.

At standard test conditions, the module produces 585W with 22.39% efficiency. Its 34.06V operating voltage and 17.18A operating current must be matched with the inverter’s MPPT window, input-current limit and planned string length. The osda 585w solar panel is especially relevant for commercial rooftops, open ground-mounted arrays and projects where the structure can accommodate its 2384mm length and 33kg weight.

Buyers searching for osda 585W should compare the exact model code, electrical ratings, dimensions and warranty instead of relying only on the wattage shown in a listing.

Key Features and Benefits

N-Type Bifacial Cell Technology

The module uses 210 × 105mm N-Type bifacial monocrystalline cells. The osda 585w n‐type design supports front-side production and can also use reflected light reaching the rear surface. This makes mounting height, rear clearance, surface reflectivity and row spacing important parts of system design.

The phrases osda 585w bifacial n type and osda 585w bif n type are both used by buyers for this cell and module configuration. In either case, the exact electrical limits should be checked before connecting the panel to an inverter.

Bifacial Energy Generation

The osda 585w bifacial module can generate additional energy from rear-side irradiance when installed above a suitable reflective surface with adequate clearance.

Under BNPI test conditions with 135W/m² rear irradiance, the module reaches 648W peak power. This is a controlled bifacial test result, not a guaranteed output for every installation. Actual rear-side gain depends on mounting design, shading, ground reflectivity, row spacing, dust and site conditions.

High Module Efficiency

The 22.39% module efficiency helps produce more rated power from the available installation area. This is useful where project designers want a high-wattage module without unnecessarily increasing the number of panels.

Final array size still depends on roof geometry, safety access, inverter capacity and string calculations.

18BB SMBB Current Collection

The 18-busbar SMBB architecture improves light capture and current collection across the cells. This supports reliable power transfer within the module and complements the N-Type bifacial design.

Positive Power Tolerance

A power tolerance of 0 to +3% means the module is not negatively sorted below its nameplate power within the declared tolerance range. This provides a clearer basis for array planning and commissioning checks.

Strong Dual-Glass Construction

The front uses 2.0mm AR-coated tempered glass, while the rear uses 2.0mm glass. The 30mm anodized aluminium alloy frame is rated for 2400Pa wind load and 5400Pa snow load.

These ratings support structural durability, but the mounting system, clamp zones and supporting structure must also be designed correctly.

IP68 Junction Box and System Rating

The module has an IP68 junction box with three diodes, 4mm² output cables and MC4 connectors. Its maximum system voltage is 1500V DC, and the maximum series fuse rating is 30A.

Installers must remain within local electrical rules and the limits of the inverter, isolators, protection devices and cable system.

PID Resistance

The module includes an anti-PID design intended to protect long-term performance against potential-induced degradation. Correct grounding, compatible system design and professional installation remain important for reliable operation.

Best For

This panel is a practical option for:

• Commercial and industrial rooftop systems designed for high-wattage modules
• Ground-mounted arrays that can benefit from rear-side irradiance
• Residential projects with sufficient roof space and structural capacity
• Installers seeking a 585W N-Type bifacial module with 1500V system capability
• Projects where high module efficiency can reduce the required panel count
• Dealers and EPC teams that require a clearly identifiable model with defined electrical ratings

When Another Panel May Be Better

Another panel may be more suitable when the available roof cannot accommodate a 2384 × 1096mm module, when a lighter panel is required for manual handling or structural reasons, or when the inverter has a lower input-current limit.

A monofacial panel may also provide better value where the rear surface will receive little usable reflected light. The installer should confirm voltage, current, string length, mounting layout and structural requirements before final selection.

Cell and Module Technology

The module contains 110 half cells arranged in a 10 × 11 layout. N-Type bifacial monocrystalline technology enables energy collection from the front and rear sides, while the SMBB layout uses multiple fine current-collection paths across each cell.

The dual-glass structure protects the cell layer on both sides and supports long-term outdoor use.

The product operates as a high-current module. Its 17.18A maximum power current and 17.95A short-circuit current should be reviewed carefully against the inverter’s per-MPPT and per-string input limits. Wattage alone is not enough to establish compatibility.

Technical Specifications

Brand: OSDA
Series: ODA-110MHD
Exact Model: ODA585-28V-MHD
Rated Power at STC: 585W
Cell Type: 210 × 105mm N-Type bifacial monocrystalline
Number of Cells: 110, arranged 10 × 11
Busbar Technology: 18BB SMBB
Module Type: Bifacial dual-glass
Module Efficiency: 22.39%
Power Tolerance: 0 to +3%
Maximum Power Voltage (Vmp): 34.06V
Maximum Power Current (Imp): 17.18A
Open-Circuit Voltage (Voc): 40.87V ±3%
Short-Circuit Current (Isc): 17.95A ±3%
NMOT Peak Power: 444W
NMOT Maximum Power Voltage: 32.04V
NMOT Maximum Power Current: 13.86A
NMOT Open-Circuit Voltage: 38.63V ±3%
NMOT Short-Circuit Current: 14.33A ±3%
BNPI Peak Power: 648W
Maximum System Voltage: 1500V DC
Maximum Series Fuse Rating: 30A
Pmax Temperature Coefficient: -0.290%/°C
Voc Temperature Coefficient: -0.250%/°C
Isc Temperature Coefficient: +0.041%/°C
Nominal Module Operating Temperature: 45°C ±2°C
Operating and Storage Temperature: -40°C to +85°C
Dimensions: 2384 × 1096 × 30mm
Weight: 33.00kg
Front Glass: 2.0mm AR-coated tempered glass
Back Glass: 2.0mm glass
Frame: Anodized aluminium alloy
Junction Box: IP68 with three diodes
Output Cables: 4mm², 35cm, including MC4 connector
Maximum Wind Load: 2400Pa
Maximum Snow Load: 5400Pa
Standards: IEC 61215 and IEC 61730
Product Warranty: 15 years for materials and workmanship
Performance Warranty: 30-year linear power output warranty

Performance and Degradation

The linear power warranty curve starts at 99% after the first year and reaches 87.4% at year 30. The separate product warranty covers materials and workmanship for 15 years.

These two warranty types should not be treated as interchangeable. One concerns the physical product, while the other concerns warranted power retention over time.

The -0.290%/°C Pmax temperature coefficient indicates how rated power changes as cell temperature rises above the test reference. Actual production will also vary with irradiance, ambient temperature, ventilation, dust, shading, cable losses, inverter efficiency and system design.

Performance Considerations for Pakistan

High summer temperatures make rear ventilation and proper mounting clearance important. The temperature coefficient helps system designers estimate heat-related power changes, but site-specific modelling is still required.

Regular cleaning is also important because dust and soiling reduce the light reaching the front glass and can limit useful rear-side irradiance.

For bifacial installations, keep the rear surface open where practical and avoid rails, cables or nearby objects creating unnecessary rear shading. A light-coloured roof or prepared ground surface may improve reflected light.

The installer must also confirm that the inverter can safely accept the module’s current and that the planned string remains within voltage limits during local hot and cold conditions.

OSDA 585W Price in Pakistan

The current price of the OSDA 585W N-Type Bifacial Solar Panel in Pakistan is Rs. 21,264.75 per panel. The osda 585w price in pakistan can change with exchange rates, shipment costs, market supply and order quantity, so confirm the latest rate and availability before payment.

For anyone comparing 585 watt solar panel price in pakistan, the complete per-panel cost and exact model should be checked instead of relying on a generic wattage-based result.

Buyers comparing osda 585w price or osda solar panel 585 watt price in pakistan can contact Hajvery Solar for retail, installer, dealer and bulk-order enquiries. The Lahore store can also help confirm the exact model before dispatch.

A-Grade and Product Authenticity

A-Grade refers to product condition, traceability and quality classification. It is not a substitute for checking the exact electrical model.

Buyers comparing some of the best solar panels in Pakistan should review efficiency, dimensions, current, warranty and system compatibility rather than wattage alone.

Before buying, check the module label, serial information, carton details, glass condition, frame alignment, connector condition and applicable warranty terms. Do not treat an unverified market label as proof of product grade or brand status.

Hajvery Solar Product Verification

For osda solar panel verification, match the brand label, exact model code, rated power, electrical values and serial information before installation. The phrase osda solar panel verification pakistan generally refers to these authenticity and model checks for panels sold in the local market.

Hajvery Solar can help buyers check the visible product identity and compatibility details before purchase. Verification should be completed before mounting because the panel’s current, voltage, dimensions and connector arrangement affect system design.

Warranty

The OSDA 585W N-Type Bifacial Solar Panel carries a 15-year guarantee on product materials and workmanship and a separate 30-year linear power output warranty. The warranted power curve reaches 87.4% at year 30.

Buyers should confirm the applicable claim requirements, supporting documents and handling procedure with Hajvery Solar before ordering.

Frequently Asked Questions

Is the OSDA 585W panel N-Type and bifacial?

Yes. It uses N-Type bifacial monocrystalline cells in a dual-glass module. The exact model is ODA585-28V-MHD.

What is the efficiency of the OSDA 585W solar panel?

Its module efficiency is 22.39% at standard test conditions, with a rated front-side output of 585W.

What is the OSDA 585W price in Pakistan?

The current price is Rs. 21,264.75 per panel. Confirm current availability and any quantity-based rate with Hajvery Solar before placing an order.

What are the panel’s dimensions and weight?

The module measures 2384 × 1096 × 30mm and weighs 33.00kg. Confirm roof space, access and structural support before installation.

Can the panel produce power from the rear side?

Yes. The bifacial rear side can use reflected irradiance. Actual gain depends on surface reflectivity, clearance, shading, layout and site conditions.

Where can I get the osda 585w datasheet?

The osda 585w datasheet can be added as a downloadable product attachment so buyers and installers can check the exact electrical and mechanical details before system design.

What warranty is included?

The panel has a 15-year product material and workmanship warranty plus a 30-year linear power output warranty.

Buy OSDA 585W N-Type Bifacial Solar Panel from Hajvery Solar

Contact Hajvery Solar Energy for osda solar 585w availability, dealer rates, retail orders and compatibility guidance.

Buyers can visit 280K Block J-1, Johar Town, Lahore, or request nationwide delivery after confirming stock and transport arrangements.