The Itel Power Tank 500 IESS-05K10N is an all-in-one portable household energy storage system engineered for reliable backup power, convenient installation and long-term performance. Its integrated 3-in-1 design combines a 500W pure sine wave hybrid inverter, a 400W MPPT solar charge controller, and a 1000Wh LiFePO4 battery in one compact, plug-and-play unit.
The built-in inverter delivers 500W nominal AC output power and up to 600VA apparent power at 230V AC. Its pure sine wave output, with total harmonic distortion below 3%, provides stable and clean electricity suitable for compatible household appliances, electronic equipment, lighting, fans, routers and office devices.
The Power Tank supports dual charging through solar PV and the utility grid, with charging power of up to 500W. Under suitable charging conditions, the battery can be fully charged in approximately two hours. Its built-in MPPT controller accepts up to 400W solar input, delivers 99% tracking efficiency, and operates across an MPPT voltage range of 11V to 60V.
A Class-A LiFePO4 battery provides 1000Wh of stored energy and a rated cycle life of more than 6,000 cycles, offering enhanced safety, durability and service life of up to 10 years under appropriate operating conditions. Backup duration can reach up to two hours, depending on the connected load and operating conditions.
With a wide grid input range of 90V–280V AC, maximum grid withstand voltage of 380Vrms and intelligent power-control technology, the unit is designed to adapt to unstable or weak-grid environments. Its fast transfer time of no more than 20 milliseconds provides UPS-class switching during electricity interruptions.
For safe and dependable operation, the Itel Power Tank includes battery fuse protection, grid and PV overvoltage protection, overload protection, short-circuit protection, overtemperature protection and Type III AC surge protection. An LED state-of-charge display, intelligent fan cooling and low operating noise make it a practical portable backup solution for homes, offices and small businesses.
| Product Series |
Power Tank |
| Product Type |
Portable Household Energy Storage System |
| System Design |
3-in-1 Plug-and-Play ESS |
| Inverter Type |
Hybrid Pure Sine Wave Inverter |
| Nominal AC Output Power |
500W |
| Maximum Apparent Output Power |
600VA |
| Nominal AC Output Voltage |
230VAC |
| Nominal AC Output Frequency |
50Hz |
| Nominal AC Output Current |
2.2A |
| Maximum AC Output Current Limit |
3.0A |
| Output Voltage Harmonic Distortion |
<3% |
| Battery-Mode Conversion Efficiency |
88% |
| Maximum PV Input Power |
400W |
| Maximum PV Input Voltage |
60V |
| MPPT Voltage Range |
11V–60V |
| Number of MPPT Trackers |
1 |
| MPPT Tracking Efficiency |
99% |
| Maximum Grid Input Voltage |
380Vrms |
| AC Input Voltage Range |
90V–280VAC |
| AC Overvoltage Protection Level |
280 ±10VAC |
| Maximum AC Input Power |
1000W |
| Maximum AC Input Current |
6A |
| AC Input Frequency |
50Hz / 60Hz |
| Charging Sources |
Solar PV and Utility Grid |
| Maximum Charging Power |
Up to 500W |
| Approximate Full-Charge Time |
Approximately 2 hours under suitable conditions |
| Battery Type |
Class-A LiFePO4 |
| Rated Battery Capacity |
314Ah |
| Rated Battery Cell Voltage |
3.2VDC |
| Battery Cycle Life |
More than 6,000 cycles |
| Expected Battery Service Life |
Up to 10 years |
| Estimated Backup Time |
Up to 2 hours, depending on load |
| State-of-Charge Display |
LED |
| Cooling Method |
Intelligent Fan Cooling |
| Operating Noise |
<45dB at 1 metre |
| Operating Temperature Range |
-10°C to +60°C |
| Temperature Power Derating |
Above 40°C |
| Maximum Operating Altitude |
4000m |
| Altitude Power Derating |
Above 2000m |
| Battery Fuse Protection |
Yes |
| Grid Overvoltage Protection |
Yes |
| PV Overvoltage Protection |
Yes |
| Short-Circuit Protection |
Yes |
| Overtemperature Protection |
Yes |
| Surge Protection |
AC Type III |
| Certifications / Standards |
IEC 62619, IEC 62368 and UN38.3 |
Reviews
There are no reviews yet.