Itel 1.6KW IP54 Hybrid Inverter

Itel 1.6KW Hybrid Inverter Overview

The Itel 1.6KW Hybrid Inverter, model IPV-1K612U, is a single-phase 1,600W off-grid inverter for solar, battery and AC input applications. If you are looking for an itel 1 6kW inverter, this model is built around a 12V battery system and supports up to 3,200W of PV input via a single MPPT tracker. This gives system designers more room to use a larger solar array while keeping the inverter’s rated AC output at 1,600W. 

The unit uses a 12V battery architecture, with a specified battery voltage range of 10.5–15V. It supports lead-acid, lithium-ion and user-defined battery settings. Solar charging can reach 140A, while the maximum discharging current is also specified at 140A. 

For homes and small installations, the inverter can combine solar generation, battery storage and AC input to supply connected loads. It is particularly worth considering when a compact 12V battery-based system is required, but the planned solar array is considerably larger than the inverter’s 1.6 kW AC output.

Why This Hybrid Inverter Stands Out

3,200W Maximum PV Input

The IPV-1K612U accepts up to 3,200W of solar PV, which is twice its 1,600W nominal AC output rating. The manufacturer also specifies a maximum PV voltage of 450V, a startup voltage of 30V, an MPPT operating range of 35–400V, and a maximum PV input current of 20A. 

This gives installers useful flexibility when planning the solar array. However, the PV design must remain within the inverter’s voltage and current limits at all times.

For buyers checking the itel 1 6kw inverter specifications, these PV limits are among the most important figures to review before selecting solar panels.

140A Solar Charging Current

The inverter supports a maximum solar charging current of 140A. It also specifies a maximum mains/generator charging current of 80A and a maximum battery discharging current of 140A. 

For a 12V battery system, these are significant current figures, so the battery bank, cables, fuses, breakers and other DC protection equipment should be correctly sized for the installation.

3200VA Surge Capacity

The nominal AC output is 1,600W, with a maximum apparent power of 2,000 VA. The manufacturer specifies a 3,200VA surge power for 5 seconds. Its overload capability is listed as 110%–150% load for 30 seconds and ≥150% load for 5 seconds. 

This can help with short-duration starting or overload conditions, but the surge specification should not be treated as a continuous operating rating.

IP54 Protection with Replaceable Dust Filter

The enclosure carries an IP54 ingress protection rating, and the product information specifically mentions a replaceable dust filter for harsh environmental conditions. 

For installations in dusty areas, the filter can be a useful maintenance feature. IP54 does not mean the inverter can be installed in an exposed location without considering rain, direct water exposure, ventilation and the manufacturer’s installation requirements.

Intelligent Fan Cooling

The IPV-1K612U uses intelligent fan cooling and has a specified noise level of < 50 dB. Its operating temperature range is -25°C to +60°C, with power derating above 45°C. 

In hot areas of Pakistan, including Punjab and Lahore, the derating point is important. The inverter should be installed where air can circulate properly rather than inside a tightly enclosed or poorly ventilated space.

Best For

The Itel 1.6KW Hybrid Inverter is worth considering for:

• Small homes or backup systems that need a 1.6KW AC output.
• Solar installations using a 12V battery bank.
• Users who want to connect a relatively large PV array within the manufacturer’s 3,200W maximum PV input.
• Battery-based systems using lead-acid or lithium-ion batteries where the voltage and operating requirements are suitable.
• Installers looking for a compact inverter with one MPPT and straightforward communication interfaces.
• Applications where solar and battery operation are more important than three-phase or parallel system expansion. 

Not Ideal For

This model may not be appropriate when:

• The property requires a three-phase inverter.
• The planned battery system uses a higher-voltage architecture rather than the specified 12V range.
• The connected load regularly exceeds the 1,600W rated output.
• The installation requires parallel operation for future inverter expansion.
• Generator integration is required because the manufacturer lists diesel generator support as unsupported.
• The solar array exceeds the inverter’s specified PV voltage or current limits.
• The project requires a dedicated smart-load output, as smart-load support is listed as not supported. 

Solar PV Input and MPPT Performance

The solar input is one of the main reasons to consider this model. The manufacturer specifies:

• Maximum PV input power: 3,200W
• Maximum PV input voltage: 450V
• Startup voltage: 30V
• MPPT voltage range: 35–400V
• Number of MPPTs: 1
• Strings per MPPT: 1
• Maximum PV input current: 20A
• MPPT tracking efficiency: >99% 

With one MPPT and one string per MPPT, the array layout needs to be planned carefully. A single MPPT is less flexible than a multi-MPPT inverter when panels have significantly different orientations or shading conditions.

The final PV design should be checked against the selected solar module’s Voc, Vmp and Isc, together with the expected operating temperature. Cold-weather Voc can rise, so the maximum DC voltage must remain within the inverter’s 450V limit. The PV input current must also remain within the specified 20A limit.

Do not select panel quantities only by adding their wattage. String voltage, current, module characteristics and temperature all need to be considered.

Battery Compatibility and Energy Storage

The IPV-1K612U uses a 12V battery architecture, with a specified battery voltage range of 10.5–15V. The manufacturer lists Lead-acid/Lithium-ion/User Defined under battery type. 

The inverter’s maximum solar charging current is 140A, maximum mains/generator charging current is 80A, and maximum discharge current is 140A. 

The datasheet does not provide a verified list of specific lithium battery brands or models. Therefore, a particular battery should not be assumed to be compatible simply because it is a lithium-ion battery. Battery compatibility should be confirmed according to the battery’s voltage range, current capability and any required communication or BMS requirements before installation.

The communication interfaces listed by the manufacturer are Wi-Fi, RS485 and RS232, but the reviewed documentation does not identify a specific lithium battery BMS communication protocol or approved battery-brand list. 

Verified Compatible Battery Options

No specific battery brands or models are verified in the manufacturer documentation reviewed.

Backup Power and Load-Shedding Performance

The IPV-1K612U is identified by the manufacturer as an off-grid inverter, with a nominal AC output of 1,600W. Its AC output is single-phase at 220/230/240V L+N+PE, and the manufacturer specifies a maximum apparent power of 2,000 VA. 

For a load-shedding application, the inverter can be considered for loads that remain within its rated output and battery capability. During battery operation, the actual backup period depends on the usable battery capacity, connected load, battery state of charge, inverter efficiency and battery operating limits.

The manufacturer specifies 3,200 VA of surge power for 5 seconds, and overload capability of 110%–150% for 30 seconds and ≥150% for 5 seconds. These figures provide information about short-duration overload handling; they should not be used as the continuous backup rating. 

No specific transfer or switch time is specified in the manufacturer’s datasheet under review, so it should not be advertised as zero-interruption or assigned a fixed switching time.

Monitoring and Communication

The manufacturer lists Wi-Fi, RS485 and RS232 communication for the IPV-1K612U. 

These interfaces provide the available communication pathways for monitoring, configuration or system integration, depending on the supported accessories and software. However, the reviewed datasheet does not provide sufficient information to claim specific mobile app functions, historical energy reporting, remote alarms or a particular monitoring platform.

The inverter also includes an LCD with physical buttons, allowing direct access to information and settings on the unit. 

For customers searching for an itel 1 6kw inverter manual or itel 1 6 kw inverter manual pdf, the manufacturer documentation should be checked for installation, configuration and operating instructions applicable to the exact IPV-1K612U model.

Technical Specifications

Solar PV Input

Battery

AC / Grid Input and Output

Backup / Surge Capability

General Specifications

The manufacturer also specifies protection against overvoltage, overload, short circuit, overtemperature and surge. 

Customers comparing the itel 1 6kw inverter datasheet with the product specifications above should use the exact IPV-1K612U documentation, because specifications can differ between inverter models.

Recommended Solar System Size

The inverter has a 1,600W AC output rating but can accept up to 3,200W of PV input. Therefore, the solar array need not be limited to 1.6 kW simply because the inverter’s AC output is 1.6 kW. 

The manufacturer’s maximum PV input is 3,200W, but the final array design must also comply with the 450V maximum PV voltage, 35–400V MPPT range and 20A maximum input current.

The practical solar configuration should be designed around the actual panel specifications, including Voc, Vmp and Isc, as well as temperature effects and the single-MPPT configuration. A qualified installer should confirm the final string design before installation.

Hybrid Inverter Use in Pakistan

For smaller Pakistani solar systems, a 1.6 kW output can be useful when the backup requirement is limited to selected appliances rather than the entire property. The 12V battery architecture also makes the battery voltage requirement clear from the start. However, the high charging and discharging currents mean the DC side of the installation needs careful sizing of cables and protection.

The 3,200W PV input capacity can be useful for users who want substantial daytime solar input while keeping the inverter’s rated AC output at 1,600W. During periods of high temperature, installers should also account for the manufacturer’s power-derating point above 45°C. 

The IP54 enclosure and replaceable dust filter can be helpful in dusty installation environments. However, the inverter should still be installed in a suitable location with adequate ventilation and protection from direct water exposure.

For homes in Lahore, Punjab and other parts of Pakistan, the system should be designed around the actual loads that need to remain operational during grid outages. Battery capacity should be selected based on the loads and the required backup duration, rather than simply on the inverter’s 1.6 kW rating.

Itel 1.6KW Hybrid Inverter Price in Pakistan

The price of the Itel 1.6KW Hybrid Inverter in Pakistan can vary based on stock availability, exchange rates, distributor pricing and market conditions. Check the latest price shown on this product page for Hajvery Solar’s current listed rate.

For customers searching for the itel 1 6 kW hybrid inverter price in Pakistan, the latest product page price should be treated as the current reference rather than an outdated market quotation.

The itel 1 6 kW inverter price in Pakistan may also vary depending on availability, distributor pricing and market conditions. Dealers, installers and bulk buyers can contact Hajvery Solar for current wholesale rates and quantity-based availability.

Customers searching for the itel 1 6 kw inverter price or itel 1 6 kw hybrid inverter price can check the current listing on this product page for Hajvery Solar’s latest available rate.

Hajvery Verified Product Information

Brand: Itel

Exact Model: IPV-1K612U

Product Type: Hybrid / Off-Grid Solar Inverter

Technical Data Source: Official Manufacturer Documentation

Specification Status: Verified against the manufacturer documentation reviewed

Battery Compatibility Status: Specific battery brands/models require compatibility confirmation

Last Technical Review: August 2026

Hajvery Solar uses available manufacturer documentation when publishing product specifications. The exact model, applicable warranty terms, and battery compatibility should be checked before purchase, particularly when a lithium battery is being considered.

The manufacturer also notes that the material is provided for reference and that product design and specifications may change. 

Warranty and After-Sales Support

Manufacturer / Official Warranty: 3 years. 

Warranty coverage remains subject to the applicable manufacturer terms, product serial information, purchase documentation, installation conditions and operating requirements.

Hajvery Solar After-Sales Support: Hajvery Solar can assist customers with product information, battery/inverter compatibility checks, and warranty or serial number verification, where applicable.

Before You Buy

• Phase: Confirm that your property or backup circuit requires a single-phase inverter.
• Battery Architecture: The IPV-1K612U uses a 12V battery system with a 10.5–15V specified operating range.
• Backup Load: Add up the appliances that must operate during an outage and keep continuous demand within the inverter’s 1,600W rated output.
• PV Design: Keep PV voltage and current within the 450V maximum voltage, 35–400V MPPT range, and 20A input current limit.
• Battery Compatibility: For lithium batteries, confirm voltage, current and BMS/communication requirements rather than relying only on the term “lithium-ion.”
• Generator Requirement: Do not select this model if direct diesel-generator support is essential, as the manufacturer lists it as unsupported.
• Future Expansion: Parallel capability is not supported, so future system expansion through parallel inverter operation should be considered before purchase.
• Installation Location: Allow suitable ventilation and consider the manufacturer’s temperature derating above 45°C and IP54 protection requirements. 

Frequently Asked Questions

Is the Itel 1.6KW Hybrid Inverter single-phase or three-phase?

The Itel 1.6KW Hybrid Inverter (IPV-1K612U) is a single-phase inverter with a nominal output voltage of 220/230/240V L+N+PE. 

Does the Itel 1.6KW Hybrid Inverter support lithium batteries?

Yes. The manufacturer lists Lithium-ion as one of the supported battery types, along with lead-acid and user-defined battery settings. The specified battery architecture is 12V, with a battery voltage range of 10.5–15V. Specific lithium battery compatibility should be confirmed before installation. 

Which batteries are compatible with the Itel 1.6KW Hybrid Inverter?

The manufacturer lists lead-acid, lithium-ion, and user-defined battery types but does not provide a specific battery brand/model compatibility list in the reviewed datasheet. A planned battery should therefore be checked against the inverter’s voltage, current and communication requirements before purchase. 

How much solar PV can be connected to the Itel 1.6KW Hybrid Inverter?

The manufacturer specifies a maximum PV input of 3,200W. The PV array must also remain within the 450V maximum PV voltage, 35–400V MPPT range and 20A maximum input current. 

Can the Itel 1.6 kW Hybrid Inverter provide backup power during load shedding?

It is specified as an off-grid inverter with a 1,600W nominal AC output and battery support. It can therefore be considered for battery-backed loads within its rated operating limits. Actual backup duration depends on battery capacity, connected load, state of charge and other system factors. 

Does the Itel 1.6KW Hybrid Inverter support a generator?

The manufacturer specifically lists Diesel Generator Support: Not Supported. It should therefore not be selected where direct generator integration is a required feature. 

Can this inverter be connected in parallel?

No. The manufacturer lists Parallel Capability: Not Supported for the IPV-1K612U. 

What is the price of the Itel 1.6KW Hybrid Inverter in Pakistan?

The current Itel 1.6KW Hybrid Inverter price in Pakistan depends on the latest Hajvery Solar product-page listing, stock position and market conditions. Customers searching for the price of the Itel 1.6 kW inverter in Pakistan or the Itel 1.6 kW hybrid inverter in Pakistan should check the current price on the product page or contact Hajvery Solar for the latest retail or dealer rate.

What warranty is available?

The manufacturer documentation states a 3-year warranty for the IPV-1K612U. 

Buy the Itel 1.6 kW Hybrid Inverter from Hajvery Solar.

The Itel 1.6KW Hybrid Inverter is available for customers looking for a compact 12V battery-based inverter with up to 3,200W solar PV input, 140A maximum solar charging current and single-phase 1,600W output.

Hajvery Solar provides retail sales, dealer and wholesale assistance, battery/inverter compatibility checking and after-sales support where applicable.

Hajvery Solar Energy

280K Block J-1, Johar Town, Lahore, Pakistan

Need help confirming battery compatibility, PV sizing or backup requirements? Contact Hajvery Solar before ordering so the inverter can be matched with the planned solar and battery system.