INVT GD200A 2.2KW

INVT GD200A 2.2KW General Purpose Vector Drive Overview

The INVT GD200A 2.2KW General Purpose Vector Drive is built for accurate speed, frequency, and torque management of compatible three-phase asynchronous motors. It belongs to the Goodrive200A high-performance general-purpose vector drive range and combines DSP-based control with V/F and sensorless vector control technologies.

This model suits industrial and commercial applications where a motor must run at controlled speeds rather than continuously at the fixed supply frequency. It can help provide smooprovidesontrolled acceleration, adjustable operating speed and better applicati,on-specific motor control.

The term invt gd200A is commonly used by buyers searching for this drive series, while invt gd200a and invt vfd gd200a are also used for the same product family. For correct selection, buyers should always verify the full model, power rating, voltage class and motor current rather than relying only on the series name.

Key Features and Benefits

V/F and Sensorless Vector Control

The drive supports conventional V/F control as well as sensorless vector control. V/F control is practical for standard variable-speed applications, while sensorless vector control provides improved motor response without requiring a motor-mounted speed encoder.

Accurate Motor Auto-Tuning

Rotating and static motor auto-tuning options help the drive identify important motor characteristics. Static auto-tuning is useful where the motor cannot be separated easily from its mechanical load, while rotating auto-tuning can be selected when the application permits the motor to rotate during setup.

Adjustable Frequency Control

The 0–400Hz output frequency range provides flexibility for compatible motors and applications. Frequency can be controlled through digital settings, analogue signals, pulse-frequency input, multi-step speed commands, simple PLC functions, PID control or supported communication methods.

Smooth Motor Restart

Speed-tracking functionality allows the drive to detect and smoothly restart a motor that may already be rotating. Correct commissioning and application checks remain essential before enabling this feature.

Automatic Voltage Regulation

Automatic voltage adjustment helps maintain stable motor-side voltage when short-term fluctuations occur in the incoming power supply.

Built-In Braking Unit

This 2.2KW model includes a built-in braking unit. An appropriately selected external braking resistor may be required when dynamic braking is used. Resistor selection and braking configuration must match the load inertia, stopping time and operating cycle.

Built-In EMC Filter

A C3 EMC filter is built in for applicable IEC 61800-3 C3 environments. An external filter can be selected where C2-level installation requirements apply.

Flexible Control Terminals

The GD200A platform provides multiple analogue, digital, pulse and relay connections. These interfaces allow integration with switches, sensors, controllers, pressure transmitters and other compatible automation equipment.

Best Applications

The INVT GD200A 2.2KW VFD is suitable for correctly sized applications such as:

• Industrial fans and blowers
• Water-circulation pumps
• HVAC equipment
• Air compressors
• Conveyors and material-handling systems
• Plastic-processing machinery
• Petroleum and process-industry equipment
• Selected production machinery
• Constant-pressure water-supply systems
• Other standard variable-speed transmission loads

Final suitability depends on the motor nameplate, starting torque, load behaviour, stopping requirements and surrounding environment.

Not Ideal For

This drive should not be selected when:

• The motor requires more power or current than the drive can supply
• The available power supply does not match the drive’s voltage and phase requirements
• A single-phase motor must be operated without confirmed VFD compatibility
• The application requires a different motor-control method
• The operating environment cannot meet the IP20 installation requirements
• The load has demanding starting or braking requirements that have not been evaluated
• The application requires direct solar PV input or built-in solar MPPT operation

This is a general-purpose AC vector drive and should not be presented as a dedicated solar pump inverter.

Motor Compatibility and Selection

The drive is rated for a 2.2KW three-phase asynchronous motor, subject to motor current and application requirements. Its rated output current is 5A.

Power rating alone is not enough for final sizing. The following motor and load details must also be checked:

• Rated motor voltage
• Motor phase
• Full-load motor current
• Rated frequency
• Required operating-speed range
• Starting and running torque
• Acceleration and deceleration time
• Load inertia
• Braking requirements
• Duty cycle
• Cable length
• Installation temperature and ventilation

A 2.2KW motor whose rated current exceeds the drive’s output-current limit may require a different VFD selection. Heavy-duty machinery may also require application-specific sizing even when the motor power matches.

Control and Automation Options

The drive accepts several frequency-command methods, including keypad settings, analogue input, pulse-frequency input, multi-step speed control, simple PLC operation, PID settings and Modbus communication.

PID control is useful for compatible closed-loop applications such as constant-pressure water systems. A suitable pressure transmitter or feedback sensor must be selected, wired and configured separately.

The control interfaces include analogue inputs and outputs, standard digital inputs, high-speed pulse functions, an open-collector output and programmable relay outputs. Actual terminal use depends on the required control logic and parameter configuration.

Protection and Operational Safety

The GD200A series provides more than 30 fault-protection functions. Applicable protection functions include:

• Overcurrent protection
• Overvoltage protection
• Undervoltage protection
• Overheating protection
• Input or output phase-loss protection
• Motor and drive overload protection

Protection functions reduce the risk of damage, but they do not replace correct VFD sizing, motor protection settings, earthing, circuit protection, ventilation or professional installation.

Technical Specifications

Product type: General-purpose vector drive

Brand: INVT

Series: GD200A / Goodrive200A

Exact model: GD200A-2R2G-4

Rated output power: 2.2KW

Input supply: Three-phase 380VAC ±15%

Input frequency: 50Hz or 60Hz

Permitted input-frequency range: 47–63Hz

Rated input current: 5.8A

Rated output current: 5A

Output voltage: 0 to input voltage

Output frequency: 0–400Hz

Control modes: V/F and sensorless vector control

Compatible motor type: Three-phase asynchronous motor

Speed ratio: 1:100

G-type overload capability: 150% of rated current for 1 minute, 180% for 10 seconds and 200% for 1 second

Frequency-setting methods: Digital, analogue, pulse-frequency, multi-step speed, simple PLC, PID and supported communication settings

Communication: Modbus support

Ingress protection: IP20

Cooling method: Air cooling

Operating temperature: -10°C to 50°C, with derating required above 40°C

Mounting methods: Wall mounting and flange mounting

Braking unit: Built in

Braking resistor: External, when required

EMC filter: Built-in C3 filter; external C2 filter optional

Gross weight: 2.5kg

Listed packing dimensions: 275 × 205 × 235mm

Installation and Wiring Guidance

Installation should be completed by a qualified technician familiar with industrial VFD systems. The drive requires adequate ventilation and should be installed inside a suitable electrical enclosure where protection from dust, water, conductive contamination and accidental contact is required.

Input power must be connected to the designated input terminals, while the motor must be connected only to the drive’s output terminals. Installing power-factor correction capacitors, surge suppressors or unsuitable switching equipment between the VFD and motor can cause faults or equipment damage.

Anyone searching for an invt gd200a wiring diagram should use the matching GD200A connection layout and verify every terminal before energising the system. Control-terminal wiring, power wiring, earthing and braking-resistor connections must follow the correct installation practices.

Parameter Settings and Manual Resources

Correct parameters depend on the motor nameplate and application. At minimum, technicians should check the motor voltage, rated current, frequency, rated speed, acceleration time, deceleration time, control mode and command source.

Common resource searches include invt gd200a manual, invt gd200a manual pdf, invt gd200a user manual, invt gd200a user manual pdf download and invt gd200a parameter setting. Other search variations include invt gd200 manual pdf download, invt inverter gd200a manual, invt drive gd200a manual, manual inverter invt gd200a and invt vfd gd200a manual pdf.

Buyers may also search for invt gd200a catalog, invt vfd parameter setting pdf free download or invt vfd manual pdf free download. Always use the correct official GD200A file and confirm that the instructions apply to the installed drive and firmware before changing parameters.

INVT GD200A Price in Pakistan

The current price of INVT GD200A 2.2KW General Purpose Vector Drive in Pakistan is Rs. 33,170 per VFD.

Buyers comparing invt gd200a price in pakistan, invt gd200a price and invt vfd price in pakistan should confirm the exact power rating and model suffix before comparing quotations. Pricing can vary with exchange rates, availability, order quantity and included accessories. A positive listed price does not by itself confirm current stock.

Hajvery Product Verification

Before dispatch or installation, verify:

• INVT branding and product condition
• Exact model GD200A-2R2G-4
• 2.2KW rated output power
• Three-phase 380V-class input requirement
• 5A rated output current
• Product label and serial information
• Required keypad, braking resistor or external accessories
• Compatibility with the intended motor and load
• Applicable warranty and claim documentation

Warranty and After-Sales Support

The INVT GD200A 2.2KW General Purpose Vector Drive comes with an official INVT 1-year replacement warranty. Warranty eligibility and replacement claims remain subject to the applicable official terms. Confirm installation requirements, required documents and the claim procedure with Hajvery Solar before commissioning the drive.

Before You Buy

Provide the following details for accurate selection:

• Motor power in kW or HP
• Motor rated voltage
• Single-phase or three-phase motor
• Full-load motor current
• Motor rated frequency and speed
• Pump, fan, conveyor or machinery type
• Starting-torque requirement
• Acceleration and stopping requirements
• Available input voltage and phase
• Daily operating hours
• Installation environment
• Communication or external-control requirements

Frequently Asked Questions

What does invt gd200a refer to?

It refers to INVT’s Goodrive200A general-purpose vector drive series. The complete model number must be checked because the series contains different power and voltage variants.

Can this VFD operate a 2.2KW motor?

It is rated for a compatible 2.2KW three-phase asynchronous motor. The motor’s rated voltage, full-load current and application requirements must also remain within the drive limits.

What is the rated output current?

The rated output current is 5A.

Does it work with a three-phase 380V supply?

Yes. This model belongs to the three-phase 380V-class range. The installation supply must remain within the permitted voltage range.

Can it control a single-phase motor?

It is intended for compatible three-phase asynchronous motors. Do not connect a single-phase motor unless a qualified engineer confirms both the motor design and VFD compatibility.

Does the drive have a built-in braking unit?

Yes. A built-in braking unit is provided, while a correctly sized external braking resistor is required when dynamic braking is needed.

Does it support external automation controls?

Yes. It provides analogue, digital, pulse and relay interfaces along with Modbus communication for compatible control systems.

Is this a solar pump VFD?

No. It is a general-purpose AC vector drive and does not have a verified direct solar PV input or solar MPPT function.

What warranty is included?

It comes with an official INVT 1-year replacement warranty, subject to the applicable warranty terms and claim requirements.

Buy INVT GD200A 2.2KW VFD from Hajvery Solar

Order the INVT GD200A 2.2KW General Purpose Vector Drive from Hajvery Solar Energy for industrial motor-control, HVAC, pumping and automation applications in Pakistan. Share the motor nameplate and application details before ordering so the required voltage, current, control method, braking arrangement and accessories can be checked.