Jinko 595W Monofacial Solar Panel

Jinko 595W Monofacial Solar Panel Overview

The Jinko 595W solar panel suits solar projects where module output, conversion efficiency and long-term power performance matter. Its N-Type monocrystalline cells convert sunlight into electricity, while its monofacial design makes it suitable for conventional installations that primarily use front-side solar generation. Customers comparing solar panels can check the Jinko 595w monofacial solar panel price in pakistan and contact Hajvery Solar Energy to confirm availability.

The panel incorporates SMBB technology, which improves light trapping and current collection. Additionally, Hot 2.0 technology supports reliability and helps reduce light-induced degradation. These features make the module a practical option for residential rooftops, commercial solar installations and larger ground-mounted projects.

For Pakistani buyers, choosing a solar panel involves more than comparing wattage. Module efficiency, electrical characteristics, available roof space, inverter compatibility, mounting arrangements and warranty coverage all influence its suitability for a particular project.

Key Features and Benefits

N-Type Monocrystalline Cell Technology

The panel uses N-Type monocrystalline cells to generate solar electricity. This technology supports efficient power conversion and dependable module performance over its service life.

For homeowners and commercial buyers, the panel offers a high-wattage module that installers can incorporate into a properly designed solar array.

For additional technical information, visit the Jinko Solar Official Website.

SMBB Technology

SMBB technology improves light trapping and current collection within the module. As a result, the panel can collect the electrical current generated by its cells more effectively, helping support power output and reliability.

Hot 2.0 Technology

The module incorporates Hot 2.0 technology, which supports reliability and helps reduce light-induced degradation, including LID and LETID. Therefore, this feature is relevant for buyers who consider long-term solar performance when planning an installation.

High Module Efficiency

The panel offers 21.29% module efficiency, which indicates how effectively it converts sunlight reaching its surface into electrical power. This efficiency can be especially useful when planning an installation with limited roof space.

However, actual electricity generation also depends on sunlight, panel orientation, shading, temperature, dust and the overall solar system design.

PID Resistance

The module features PID resistance, which helps reduce the risk of potential-induced degradation under relevant operating conditions. Nevertheless, correct installation, electrical protection and suitable system design remain important for maintaining solar performance.

Mechanical Strength and Environmental Durability

The panel can withstand a 2400 Pa wind load and a 5400 Pa snow load. It also offers resistance to salt mist and ammonia exposure.

These features can benefit installations exposed to demanding environmental conditions. However, the mounting structure must also suit the actual site, local wind conditions and installation requirements.

Best For

The Jinko 595W Monofacial Solar Panel may suit:

• Residential solar systems where the roof layout accommodates large-format modules.
• Commercial rooftops that require high-wattage solar panels.
• Industrial solar installations with appropriately engineered mounting structures.
• Ground-mounted solar projects designed for front-side solar generation.
• Solar installers and dealers who need N-Type modules with defined electrical characteristics.
• Projects with limited installation area where module efficiency and rated output are important selection factors.

However, installers should determine the final panel quantity and array configuration according to the building’s energy requirements, available space and inverter limits.

When Another Panel Configuration May Be Better

A different module configuration may work better when an installation has limited space for large-format panels, requires different electrical characteristics or specifically aims to capture rear-side solar generation.

Therefore, consider the project’s mounting arrangement, inverter specifications, cable design, environmental conditions and total energy requirements before choosing a panel. Do not select a module on wattage alone.

Cell and Module Technology

The Jinko 595W Monofacial Solar Panel combines N-Type monocrystalline cells with SMBB and Hot 2.0 technologies.

Its monofacial construction primarily supports front-side electricity generation. In other words, installers plan the system around the usable sunlight reaching the front of the module rather than relying on electricity generation from both the front and rear surfaces.

The module contains 156 cells arranged in a 2 × 78 configuration. Additionally, its aluminium alloy frame and tempered front glass provide structural support and protect the cell assembly.

For better installation results, use a suitable mounting structure, maintain proper ventilation and minimise avoidable shading.

Technical Specifications

Performance and Degradation

The panel has a −0.30%/°C temperature coefficient for maximum power. This means its maximum power output decreases as cell temperature rises above the reference temperature, assuming other conditions remain equal.

This specification matters in Pakistan, where solar modules can become considerably hotter than the surrounding air during summer. Therefore, adequate airflow beneath the modules, appropriate mounting and correct system design can help manage operating temperatures.

The panel also carries a 30-year linear power warranty, with stated guaranteed power performance of 87.4% at the end of the warranty period. Buyers should check the applicable warranty conditions before purchase.

However, actual energy production varies with sunlight availability, installation angle, shading, dust accumulation, module temperature and system losses. Therefore, rated wattage does not guarantee a particular amount of daily electricity generation.

Performance Considerations for Pakistan

Solar panels in Pakistan commonly operate in hot and dusty conditions. Buyers and installers should consider these factors when planning a rooftop or ground-mounted installation.

• High temperatures: Allow suitable ventilation beneath the panels and use a mounting arrangement appropriate for the site.
• Dust and soiling: Inspect and clean the module when needed, following safe cleaning practices.
• Shading: Avoid unnecessary shading from walls, trees, water tanks and nearby structures.
• Electrical design: Check the module voltage and current against the inverter’s permitted operating limits.
• Mounting: Ensure the roof, rails, clamps and supporting structure can safely carry the panel load and withstand site-specific wind conditions.
• System protection: Use appropriate electrical protection, earthing and installation practices.

Before installation, a qualified installer should verify the string configuration and total array capacity.

Jinko 595W Solar Panel Price in Pakistan

The Jinko 595w solar panel price in pakistan is an important consideration for homeowners, businesses, installers and solar dealers planning a new installation or expanding an existing system.

The current price of the Jinko 595W Monofacial Solar Panel in Pakistan is Rs. 22,967.00 per panel.

However, the total project cost depends on the number of panels, inverter selection, mounting structure, wiring, protection equipment, labour and other installation requirements. Buyers should confirm bulk quantities and product availability with Hajvery Solar Energy before placing an order.

For customers in Lahore and other parts of Pakistan, selecting the correct module and checking its compatibility with the planned inverter can help avoid unnecessary installation changes.

Hajvery Solar Product Verification

Before purchasing the Jinko 595W Monofacial Solar Panel, confirm the exact model designation, product identification and applicable warranty coverage.

Hajvery Solar Energy can guide buyers on the information required to check panel authenticity, assess electrical compatibility and plan a suitable solar installation.

Additionally, installers should verify the panel’s voltage, current and temperature-related electrical behaviour against the selected inverter. They must also respect the maximum system voltage, series fuse rating and other design limits.

For commercial projects and bulk orders, confirm the required quantity, delivery arrangements and applicable product terms before finalising the purchase.

You can also verify your Jinko Solar Panel at Hajvery Solar Energy through the following product verification link.

Panel Verification Link: Jinko Solar Panel Verification

Warranty

The Jinko 595W Monofacial Solar Panel carries a 12-year product warranty and a 30-year linear power warranty.

These warranties cover different aspects of the module, so buyers should not treat them as interchangeable. The product warranty concerns the module under the applicable warranty terms, while the linear power warranty covers its warranted power performance over time.

Before ordering, confirm the warranty provider, claim procedure, applicable conditions and required claim documents with Hajvery Solar Energy. All coverage remains subject to the applicable warranty terms.

Frequently Asked Questions

Is the Jinko 595W Monofacial Solar Panel an N-Type panel?

Yes. It uses N-Type monocrystalline cells and incorporates SMBB and Hot 2.0 technologies.

What is the efficiency of the Jinko 595W solar panel?

Its module efficiency is 21.29%. However, actual electricity generation depends on sunlight, temperature, shading, installation angle and other operating conditions.

Is this a monofacial solar panel?

Yes. It is a monofacial module designed primarily for front-side solar generation.

What are the voltage and current ratings?

The maximum power voltage is 45.29V, and the maximum power current is 13.14A. Additionally, its open-circuit voltage is 54.80V, while its short-circuit current is 13.90A. Installers should check these values against the inverter and string design.

What is the size and weight of this panel?

The module measures 2465 × 1134 × 35 mm and weighs 30.6 kg. Therefore, buyers should confirm available roof space, handling requirements and mounting compatibility before installation.

What is the Jinko 595W solar panel price in Pakistan?

The current price is Rs. 22,967.00 per panel. However, buyers should contact Hajvery Solar Energy to confirm availability, order quantities and applicable purchase terms.

What warranty comes with this solar panel?

It carries a 12-year product warranty and a 30-year linear power warranty. Before purchase, confirm the applicable coverage and claim procedure.

Buy Jinko 595W Monofacial Solar Panel from Hajvery Solar Energy

Choose Hajvery Solar Energy for assistance with selecting solar panels for residential, commercial and industrial installations. Our team can help you review product specifications, assess inverter compatibility and plan the required panel quantity.

Visit Hajvery Solar Energy at 280K Block J-1, Johar Town, Lahore, or contact the team to discuss availability and delivery arrangements.

To explore more options, visit Jinko Solar Panels in Pakistan.