INVT GD200A 30KW

INVT GD200A 30KW General Purpose Vector Drive Overview

The INVT GD200A 30KW General Purpose Vector Drive is designed for controlled operation of compatible three-phase asynchronous motors. It regulates motor speed and torque by adjusting the output frequency and voltage according to the operating requirement.

The GD200A series combines a DSP control system with V/F and sensorless vector control. It is suitable for applications that require stable motor performance, adjustable speed, controlled acceleration, controlled deceleration, and dependable protection against common electrical and operating faults.

This 30KW model is intended for general-duty industrial loads. Its applicable uses include fans, pumps, air compressors, HVAC equipment, water circulation systems, plastic machinery, and other compatible motor-driven equipment.

Key Features and Benefits

V/F and Sensorless Vector Control

The drive supports conventional V/F control and sensorless vector control. V/F mode provides straightforward frequency-based motor control, while sensorless vector control offers improved torque and speed response without requiring a motor-mounted encoder.

Accurate Motor Auto-Tuning

Rotating and static motor auto-tuning options help the drive identify motor characteristics for improved control. Static auto-tuning is useful when disconnecting the mechanical load from the motor is difficult.

Wide Output Frequency Range

The adjustable output frequency range of 0–400Hz allows the motor speed to be matched with the requirements of the connected equipment. Final frequency limits must remain within the safe operating range of the motor and driven load.

Strong General-Duty Overload Capability

For general-duty operation, the drive supports:

• 150% of rated current for one minute
• 180% of rated current for ten seconds
• 200% of rated current for one second

These ratings help the drive manage temporary starting or operating loads. They do not replace correct motor and application sizing.

Multiple Frequency Control Options

Operating frequency can be controlled through digital settings, analogue signals, pulse frequency input, multi-step speed settings, simple PLC functions, PID control, Modbus communication, and supported PROFIBUS configurations.

Automatic Voltage Adjustment

Automatic voltage adjustment helps maintain stable motor voltage when the incoming grid voltage changes within the supported operating range.

Built-In Braking Unit

The 30KW general-duty model includes a built-in braking unit. An external braking resistor is required when dynamic braking is needed. Resistor selection must match the braking demand, duty cycle, and installation requirements.

Built-In C3 EMC Filter

A C3 input filter is built in for industrial EMC requirements. An external C2 filter is optional where the installation requires the applicable C2 performance level.

Flexible Installation

The 30KW drive supports wall and flange mounting. Its separate air-duct design helps isolate electronic components from contaminants and supports heat management inside a correctly designed control cabinet.

Best For

The INVT GD200A 30KW VFD is suitable for properly matched applications such as:

• Industrial water pumps
• Centrifugal pumps
• Ventilation and exhaust fans
• HVAC motors
• Air compressors
• Water circulation systems
• Constant-pressure water supply systems
• Plastic processing machinery
• Oil-industry equipment
• Mining and coal-industry machinery
• Selected conveyors and process motors
• Other standard variable-speed transmission loads

Application suitability depends on the motor nameplate, load characteristics, starting torque, operating cycle, environmental conditions, and required control method.

Not Ideal For

This drive should not be selected for:

• Motors with incompatible voltage, phase, current, or frequency ratings
• Single-phase motors
• Loads exceeding the drive’s output-current or overload capability
• Outdoor or dusty installation without a suitable protective enclosure
• Direct solar PV operation without an approved external system design
• Applications requiring a dedicated solar MPPT pump inverter
• High-regeneration loads without correctly selected braking equipment
• Safety-critical machinery without the required external protection and control system

Motor and Load Compatibility

The drive has a 30KW general-duty output rating, approximately equivalent to 40HP. Horsepower conversion alone is not sufficient for selecting a VFD.

Before installation, compare the following information with the motor nameplate:

• Rated motor power
• Rated voltage
• Number of phases
• Full-load current
• Rated frequency
• Motor type
• Required starting torque
• Operating duty
• Acceleration and deceleration requirements
• Load inertia

The connected motor must be a compatible three-phase asynchronous motor. The rated output current of the drive is 60A, so the motor current and operating load must remain within the drive’s applicable limits.

Agriculture and Water-Pumping Applications in Pakistan

The GD200A 30KW can control compatible three-phase motors used with irrigation pumps, tube-well systems, water-transfer pumps, and constant-pressure water supply installations.

It can provide adjustable pump speed and PID-based pressure control when properly integrated with compatible feedback sensors and external control equipment. Pump selection must consider total dynamic head, water-flow requirement, bore depth, pipe size, motor current, and operating duty.

This model is a general-purpose AC motor drive and does not have a documented solar MPPT input. A solar pumping system requiring direct PV operation should use a suitable solar pump inverter or an engineered power-conversion arrangement.

Industrial Motor Applications

The drive can be used for speed control in fans, pumps, air compressors, HVAC systems, plastic machinery, water circulation equipment, and selected industrial process motors.

Sensorless vector control supports improved torque response for changing loads, while multiple frequency-reference methods allow the drive to work with manual controls, analogue sensors, PLC systems, and supported communication networks.

Application-specific engineering may be required for high-inertia machinery, frequent braking, rapid acceleration, heavy starting torque, or continuously varying loads.

Protection and Control Features

The GD200A series provides more than 30 fault-protection functions. Applicable protection and control functions include:

• Overcurrent protection
• Overvoltage protection
• Undervoltage protection
• Motor and drive overload protection
• Overheating protection
• Input or output phase-loss protection
• Speed tracking for a rotating motor
• Automatic voltage adjustment
• Controlled acceleration and deceleration
• PID process control
• Multi-step speed operation
• Simple PLC operation
• Modbus communication
• Dynamic, DC, flux, and short-circuit braking modes

Protection parameters must be configured according to the motor, load, and installation conditions.

Technical Specifications

Installation and Engineering Notes

Install the drive inside a properly ventilated control panel with sufficient clearance for cooling. Because the enclosure is rated IP20, additional protection is necessary in dusty, damp, corrosive, or outdoor environments.

Use correctly sized input cables, output cables, protective devices, earthing conductors, and control wiring. Keep motor cables and signal cables separated to reduce electrical interference.

Long motor cables, high-frequency operation, heavy starting loads, frequent braking, or sensitive equipment may require additional reactors, filters, braking resistors, or other accessories. Final installation and parameter commissioning should be completed by a qualified VFD technician.

INVT GD200A Manual, Wiring Diagram and Parameter Resources

Customers searching for invt gd200A or invt vfd gd200a information should always match the document with the Goodrive200A series and the correct voltage class.

The invt gd200a manual, invt gd200a user manual, and invt gd200a manual pdf contain important instructions for terminals, commissioning, motor auto-tuning, fault codes, and operating parameters. Searches such as invt gd200a user manual pdf download and invt gd200 manual pdf download should lead to a genuine and complete GD200A document.

The invt gd200a wiring diagram must be checked before connecting the power supply, motor, braking resistor, relays, analogue signals, or communication terminals. Wiring should be completed with the input power isolated.

For invt gd200a parameter setting, confirm the motor nameplate values before auto-tuning or running the equipment. Anyone searching for invt vfd parameter setting pdf free download or invt vfd manual pdf free download should avoid using instructions prepared for a different INVT series.

The invt gd200a catalog is useful for product selection, while searches including manual inverter invt gd200a, invt vfd gd200a manual pdf, invt inverter gd200a manual, and invt drive gd200a manual relate to installation and commissioning information for this drive family.

INVT GD200A 30KW VFD Price in Pakistan

The current price of the INVT GD200A 30KW General Purpose Vector Drive in Pakistan is Rs. 165,850 per VFD.

Customers comparing invt gd200a price in pakistan or the wider invt gd200a price range should confirm the required model, voltage class, quantity, and availability before ordering. Prices can change because of exchange rates, import costs, and market conditions.

Hajvery Product Verification

Before purchasing, verify the INVT branding, complete model number, 30KW general-duty rating, voltage class, serial label, packaging, and supplied accessories. The product model and motor requirements should also be checked against the intended application.

Hajvery Solar Energy can assist buyers, installers, and dealers with model verification and basic compatibility checks before order confirmation.

Warranty and After-Sales Support

This product comes with a 1-year replacement warranty by INVT Official. Confirm the applicable warranty claim requirements with Hajvery Solar Energy before purchasing and retain the invoice, serial information, and product packaging.

Before You Buy

Confirm these details before placing the order:

• Motor rated power and full-load current
• Motor voltage, phase, and frequency
• Pump or machinery application
• Required starting torque
• Continuous or variable-load duty
• Acceleration and deceleration time
• Braking requirements
• Control method and communication requirement
• Installation-panel ventilation
• Dust, moisture, and ambient temperature
• Required reactors, filters, or braking resistor

Frequently Asked Questions

What is the rated power of this INVT GD200A drive?

It has a 30KW general-duty rating for compatible three-phase asynchronous motors.

Can it operate a 40HP motor?

30KW is approximately equal to 40HP, but suitability must be confirmed from the motor’s rated voltage, current, frequency, operating duty, and starting-torque requirement.

What is the rated output current?

The rated output current for the 30KW general-duty rating is 60A.

Does it support sensorless vector control?

Yes. It supports V/F and sensorless vector control for compatible asynchronous motors.

Can this VFD operate directly from solar panels?

It is a general-purpose AC vector drive without documented solar MPPT operation. Do not connect a PV array directly unless the complete system has been designed and approved for that purpose.

Does it include a braking unit?

Yes. A braking unit is built into this model. A compatible external braking resistor is required when dynamic braking is used.

What is its current price in Pakistan?

The current price of the INVT GD200A 30KW General Purpose Vector Drive is Rs. 165,850 per VFD.

What warranty is available?

It comes with a 1-year replacement warranty by INVT Official.

Buy INVT GD200A 30KW General Purpose Vector Drive from Hajvery Solar

Order the INVT GD200A 30KW General Purpose Vector Drive from Hajvery Solar Energy for industrial motor-control applications in Pakistan. Contact the Hajvery Solar team before ordering to confirm product availability, motor compatibility, required accessories, and delivery options.