itel 2.56kWh 25.6V 100Ah Lithium Battery Overview

The itel 2.56kWh 25.6V 100Ah Lithium Battery is built around LiFePO4 battery chemistry and provides 100Ah of storage capacity at a nominal 25.6V voltage. Its nominal energy is 2.56kWh, making it suitable for solar energy storage, backup power and battery-based energy management where a 25.6V battery architecture is required.

The battery uses Class-A LiFePO4 cells and an intelligent BMS for battery management and protection. It also supports communication through RS485, CAN and RS232, helping it interface with compatible energy-storage equipment.

Where extra storage is needed, the battery enables the parallel connection of up to 15 units; thus, the storage capacity can be increased in accordance with system requirements and the compatible installation design.

Hajvery Solar Energy is an itel Official Distributor, providing buyers with access to the product along with applicable warranty support.

Key Features and Buyer Benefits

Class-A LiFePO4 Battery Chemistry

The battery uses Class-A LiFePO4 cells, a lithium battery chemistry designed for energy-storage applications. The battery provides a nominal energy capacity of 2.56kWh and a cycle life above 6000 cycles under the specified test conditions.

This means that the battery can be repeatedly charged and discharged when it is used in solar-storage applications.

Intelligent BMS

An intelligent Battery Management System (BMS) manages important battery operating functions and provides multiple protection algorithms.

The battery has 50+ protection algorithms for safety and longer service life. Proper BMS communication and battery settings remain important when connecting the battery to a compatible inverter or energy-storage system.

100Ah Battery Capacity

With a 100Ah nominal capacity, this battery provides a practical storage option for 25.6V systems.

Its 2.56kWh nominal energy can be used for backup and solar energy storage, although actual usable energy and backup duration depend on the connected system, operating limits and load.

High Charge and Discharge Capability

The battery has a 50A standard charging current and a 100A maximum continuous charging current.

For discharge, the standard discharge current is 50A, while the maximum continuous discharge current is 100A. A maximum pulse discharge current of 150A is also available under the specified operating conditions.

Expandable Parallel Configuration

As many as 15 batteries can be connected in parallel, which gives installers the flexibility they need when extra energy storage is required.

When installing in parallel, it is necessary to use batteries that are compatible, connect them with the appropriate communication links, and set the system up correctly.

Multiple Communication Interfaces

The battery is equipped with communication ports for RS485, CAN and RS232. These interfaces allow it to communicate with suitable energy-storage equipment provided that the necessary protocol and configuration are supported.

Best For

The 25.6V 100Ah lithium battery is appropriate for:

• Residential solar backup systems
• Solar energy storage
• Load-shedding backup applications
• 25.6V battery-based systems
• Expandable battery banks
• Users looking for LiFePO4 battery storage
• Installations requiring battery communication through CAN or RS485

Not Ideal For

One should not choose this battery merely on the basis of its voltage or capacity.

It may not be suitable where:

• The battery voltage arrangement needed by the inverter is different.
• The inverter does not have the required BMS communication capability.
• The amount of continuous load needed is more than the battery can handle at the present time.
• The environmental protection rating required for the installation must be above IP20.
• The system must operate on battery power when outside the specified temperature range.

Before installing it, the battery’s voltage, the limits of the charge and discharge current, and communication compatibility should be checked.

Battery Capacity: kWh, Ah and Usable Energy Explained

Ah and kWh describe different battery characteristics.

The figure of 100Ah refers to the battery’s nominal electrical capacity, and 2.56kWh refers to its nominal stored energy.

For this battery:

25.6V × 100Ah ÷ 1000 = 2.56kWh

The stated 2.56kWh nominal energy should be used as the primary product capacity. Actual usable energy can vary depending on battery operating limits, inverter settings, load and system conditions.

Battery Chemistry and Cycle Life

The battery uses LiFePO4 chemistry and provides a cycle life of more than 6000 cycles at 25°C with 80% depth of discharge (DOD) under the specified test conditions.

Cycle life should not be regarded as a guaranteed number of years since the actual lifetime of the battery is influenced by operating temperature, the way it is charged and discharged, the depth of discharge, the conditions of installation, and the system settings.

The battery also has a stated 10-year design life.

Battery Management System and Safety

The integrated intelligent building management system carries out battery management and protection functions.

The battery includes 50+ protection algorithms, supporting safer operation and helping manage battery performance during charging and discharging.

The system must still be installed with the necessary electrical protection and set up in accordance with the requirements of the inverter and battery system to which it is connected.

Charging and Discharging Performance

The battery operates within a 20V–28.8V operating voltage range.

Its charging specifications include:

• Standard Charging Current: 50A
• Maximum Continuous Charging Current: 100A
• Cut-Off Charging Voltage: 28.8V
• Cut-Off Charging Current: 2A

Discharge specifications include:

• Standard Discharge Current: 50A
• Maximum Continuous Discharge Current: 100A
• Maximum Pulse Discharge Current: 150A
• Cut-Off Discharge Voltage: 20V
• Cut-Off Discharge Current: 2A

The correct charging and discharging limits should be configured according to the complete battery-inverter system.

Inverter Compatibility

The itel 25.6V 100Ah lithium battery should be matched with an inverter that supports its voltage range, current requirements and communication protocol.

The available communication interfaces are RS485, CAN and RS232. Communication compatibility should be confirmed before installation because physical voltage matching alone does not establish full BMS compatibility.

As an itel authorized dealer, Hajvery Solar Energy can help buyers check the battery and inverter requirements before purchase.

Parallel Expansion

The battery supports up to 15 units in parallel.

Parallel expansion can be useful when a single 2.56kWh battery does not provide enough storage capacity for the required system.

Before expanding a battery bank, confirm the compatible parallel configuration, communication arrangement, cabling, protection and inverter capacity for the complete system.

Technical Specifications

Estimated Backup Time

Backup duration depends on the usable battery energy, inverter efficiency and actual connected load. A nominal 2.56kWh capacity does not mean every system can deliver the full amount to AC loads.

For this reason, a fixed runtime should not be promised without knowing the inverter efficiency, battery operating limits and actual load profile.

For example, a system powering lights, fans, networking equipment and selected household loads will have a different backup duration from a system carrying high-power appliances.

Lithium Battery Use in Pakistan

The itel 25.6V 100Ah Lithium Battery can be considered for solar-storage and backup applications in Pakistan, particularly where battery storage is needed during grid outages and load shedding.

For reliable operation, installation should account for:

• Battery temperature
• Proper ventilation
• Correct inverter settings
• Charge and discharge limits
• Suitable battery protection
• Correct BMS communication
• Appropriate installation location

The specified charging temperature range is 0°C to 60°C, while the discharge temperature range is -20°C to 60°C.

itel 2.56kWh 25.6V 100Ah Lithium Battery Price in Pakistan

The current price of the itel 2.56kWh 25.6V 100Ah Lithium Battery in Pakistan is Rs. 125,000.00 per unit.

The final purchase requirement can vary depending on system size, number of batteries and installation requirements. Hajvery Solar Energy is an itel authorized dealer for genuine product supply and buyer assistance.

Hajvery Compatibility and Authenticity Check

Before purchasing, confirm the exact IPW-25100 model, required battery voltage, inverter compatibility and BMS communication requirements.

Hajvery Solar Energy is an Official itel Distributor and can assist buyers with product identification, compatibility checking and applicable warranty guidance.

For a multi-battery system, confirm the required number of units, parallel configuration and inverter capacity before ordering.

Warranty and After-Sales Support

This battery comes with a 5-year replacement warranty.

Warranty coverage should be handled according to the applicable warranty terms and claim requirements. Buyers should retain the relevant purchase and product information for warranty assistance.

Hajvery Solar Energy, an authorized itel dealer, can provide product and warranty guidance for customers purchasing this battery.

Before You Buy

Before ordering the itel 25.6V 100Ah lithium battery, check:

• Is your inverter compatible with a 25.6V LiFePO4 battery?
• Does the inverter support the required BMS communication?
• What continuous load will the battery need to support?
• Is the battery’s 100A maximum continuous current suitable for the system?
• Do you need one battery or a parallel battery bank?
• Is the installation environment suitable for the specified temperature range?
• Does your installation require a higher protection rating than IP20?

FAQs

What is the capacity of the itel 25.6V 100Ah Lithium Battery?

The battery has a 100Ah nominal capacity and 2.56kWh nominal energy at a 25.6V nominal voltage.

What type of battery is itel 25.6V 100Ah?

It is a LiFePO4 lithium battery using Class-A LiFePO4 cells.

What is the current price of the itel 25.6V 100Ah Lithium Battery in Pakistan?

The current price is Rs. 125,000.00 per unit.

What is the cycle life of this lithium battery?

The battery provides a cycle life of more than 6000 cycles at 25°C and 80% DOD under the specified test conditions.

Does the battery support parallel connection?

Yes. The battery supports up to 15 units in parallel, allowing the storage system to be expanded when the complete system design supports it.

What communication ports are available?

The battery provides RS485, CAN and RS232 communication interfaces.

What warranty does the battery have?

The battery comes with a 5-year replacement warranty.

Can this battery work with any solar inverter?

Not necessarily. The inverter must support the battery’s 25.6V architecture, charge/discharge limits and required BMS communication. Compatibility should be confirmed before installation.

Buy itel 2.56kWh 25.6V 100Ah Lithium Battery from Hajvery Solar

Choose the itel 2.56kWh 25.6V 100Ah Lithium Battery when you need a compact LiFePO4 energy-storage solution with 2.56kWh nominal capacity, intelligent BMS, communication interfaces and parallel expansion capability.

Hajvery Solar Energy offers itel products for residential, commercial and solar-storage requirements, with compatibility and warranty guidance available for buyers.