itel 10.24kWh 51.2V 200Ah Lithium Battery Overview

The itel IPL-51200H is a high-capacity LiFePO4 lithium battery built around a 51.2V nominal voltage and 200Ah capacity. Its 10.24kWh nominal energy makes it suitable for solar energy storage where dependable battery capacity is required for backup and daily energy management.

The battery uses Class-A LiFePO4 cells and an intelligent software BMS with multiple protection algorithms. It supports CAN 2.0 and RS485 communication, allowing communication with compatible inverter systems. The battery also supports up to 32 parallel units, with automatic primary and secondary unit assignment and automatic parallel addressing.

For Pakistani solar installations, the 51.2V architecture can be relevant for compatible low-voltage energy-storage systems. However, inverter compatibility should always be checked against battery voltage limits, communication protocol and supported BMS configuration before installation.

Key Features and Buyer Benefits

Class-A LiFePO4 Battery Cells

The itel IPL-51200H uses LiFePO4 battery chemistry with Class-A cells. LiFePO4 is widely used in solar storage applications where long cycle operation and battery safety are important considerations.

The battery cell has a cycle rating of more than 6000 cycles under the specified test conditions of 25°C, 0.5C/0.5C, 80% DOD and 70% EOL, and this number should be understood in the context of the stated testing conditions rather than be regarded as a guaranteed cycle count for each installation.

Intelligent BMS and Protection

The battery is equipped with with intelligent softfor a ware forhas a number of protection features, including protection against voltage fluctuations, current surges, temperature extremes, and short circuits, all of which aid in the management of keyxtremes, and short circuits, all of which aid in the management of key battery operating conditions.

10.24kWh Energy Storage

The battery has a nominal voltage of 51.2V and a capacity of 200Ah, which means its nominal energy is 10.24kWh. Solar users thus have a large amount of storage capacity for use with compatible backup and energy-storage systems.

High Charge and Discharge Capability

The battery has a 200A maximum continuous charge current and 200A maximum continuous discharge current. Peak current is rated at 210A for the specified short-duration conditions.

The power that can actually be used should still be matched to the inverter and system setup rather than being determined solely from the battery capacity.

Parallel Expansion

Up to 32 battery units may be connected in parallel, and automatic assignment of primary and secondary units together with automatic parallel addressing make it easy to manage an extended battery bank when the entire system is designed to operate in parallel.

Best For

The itel IPL-51200H can be suitable for:

• Home solar backup systems
• Hybrid solar energy storage
• Load-shedding backup applications
• Commercial energy-storage systems
• For solar users who are looking for a lithium battery storage unit with a voltage of 51.2V
• Installations requiring parallel battery expansion
• Systems that use compatible CAN 2.0 or RS485 communication

Not Ideal For

This battery should not be selected without further compatibility checking when:

• The battery voltage arrangement needed by the inverter is different.
• The inverter is not capable of meeting the battery’s communication requirements.
• The amount of load needed goes beyond the maximum charge and discharge limits that the battery can handle.
• The conditions for installation are outside the specified temperature or humidity ranges.
• The ingress protection rating needed for outdoor use is higher than that of IP20.

Battery Capacity: kWh, Ah and Usable Energy Explained

Ah and kWh describe different aspects of a battery.

The electrical capacity of a battery is measured in ampere-hours and its energy capacity in kilowatt-hours.

For this battery:

51.2V × 200Ah ÷ 1000 = 10.24kWh

The 10.24kWh nominal energy as stated by the manufacturer is still the main specification of the product. The amount of energy that can actually be used may differ due to battery settings, discharge limits, inverter efficiency, operating conditions and the system configuration.

A recommended depth of discharge for the battery is 90%, which should be taken into account when estimating the amount of storage that can actually be used.

Battery Chemistry and Cycle Life

The itel IPL-51200H uses LiFePO4 chemistry. Its battery-cell cycle life is rated at more than 6000 cycles under the specified laboratory test conditions.

The stated cycle figure is based on 25°C, 0.5C charge/discharge, 80% depth of discharge and 70% end-of-life capacity. Actual service life depends on operating temperature, charging and discharging conditions, system configuration and usage patterns.

Battery Management System and Safety

The integrated BMS manages important battery protection functions. The IPL-51200H includes:

• Voltage protection
• Current protection
• Temperature protection
• Short-circuit protection
• Circuit breaker
• Intelligent BMS
• Multiple safety protection algorithms

The battery makes use of natural cooling and has a metal casing.

Charging and Discharging Performance

The battery supports:

• Maximum continuous charge current: 200A
• Peak charge current: 210A @ 1S
• Maximum continuous discharge current: 200A
• Peak discharge current: 210A @ 3S
• Operating voltage range: 43.2V–57.6V

When matching a battery with a hybrid inverter, account should be taken of the inverter’s own limits with regard to battery current; these can also limit the actual charge or discharge power of the entire system.

Inverter Compatibility

The IPL-51200H itel is capable of providing CAN 2.0 and RS485 communication for use with compatible inverter systems, and it also has self-adaptive communication with mainstream inverters.

Before installation, confirm:

• Battery voltage compatibility
• Inverter charge-current limit
• Inverter discharge-current limit
• CAN/RS485 communication support
• BMS communication configuration
• Compatible communication cable and connection arrangement

Hajvery Solar Energy is an itel authorized dealer, and buyers can request compatibility checking before selecting this battery for a solar system.

Parallel Expansion

The IPL-51200H can support up to 32 parallel units, with automatic assignment of both primary and secondary units as well as automatic parallel addressing.

Parallel expansion is useful in the case where one battery is not sufficient to give the required storage capacity. The entire installation should be based on the inverter’s approved battery configuration, its communication needs, the protection measures and the maximum parallel capacity.

Technical Specifications

Estimated Backup Time

It is not possible to state a single fixed value for the backup duration since this will depend on the actual load that is connected, the efficiency of the inverter, the limits within which the battery operates, and the amount of energy that is usable.

For example, the same 10.24kWh battery will have very different demands when carrying either a 500W load or a 5kW load, and practical runtime can also be influenced by the age of the battery, temperature, and the way the system is configured.

Before installing it, the connected load in watts and the suitable inverter configuration should be verified for an accurate backup calculation.

Lithium Battery Use in Pakistan

The itel 51.2V 200Ah battery can be considered for solar-storage applications where battery backup is required during periods of grid unavailability or where stored solar energy is used later.

Because of its hot climate, the conditions for installation become important. The specified temperature range for charging the battery is from 0°C to +60°C, the range for discharging is from -20°C to +60°C, and the recommended operating temperature range is 15°C to +35°C.

The IP20 rating also means installation should be planned in a suitable protected environment rather than treating the battery as an outdoor weatherproof enclosure.

itel 51.2v 200ah 10kwh Lithium Battery Price in Pakistan

The itel 51.2V 200Ah 10kWh lithium battery provides 10.24kWh nominal energy in a 51.2V LiFePO4 configuration.

In Pakistan the current price of the itel 10.24kWh 51.2V 200Ah Lithium Battery is Rs. 450,000.00.

For buyers searching itel 51 2 v 200ah 10kwh price in pakistan, the exact model covered here is the 51.2V 200Ah IPL-51200H.

The phrase itel 51 2 v 200ah 10kwh price also refers to this same 51.2V, 200Ah battery configuration.

For the search phrase itel lithium battery 51 2v price in pakistan, this model is a 51.2V LiFePO4 battery with 200Ah capacity and 10.24kWh nominal energy.

Hajvery Solar Energy is an Official itel Distributor for this lithium battery and can assist buyers with product and compatibility enquiries.

Hajvery Compatibility and Authenticity Check

Hajvery Solar Energy is an itel Official Distributor. Before purchasing, buyers should confirm the exact IPL-51200H model, battery voltage, inverter compatibility, BMS communication and applicable warranty.

As an authorized itel dealer, Hajvery Solar Energy can help buyers check whether the battery configuration is appropriate for the intended compatible solar-storage system.

Serial and warranty details should also be checked during the purchasing process.

Warranty

The itel IPL-51200H comes with a 5-year warranty.

The warranty coverage should be confirmed with Hajvery Solar Energy at the time of purchase, including the applicable claim requirements and coverage terms.

Buying through Hajvery Solar Energy, an authorized itel dealer, provides a direct route for product and warranty guidance.

Before You Buy

Check these points before ordering the itel 51.2V 200Ah Lithium Battery:

• Confirm that your inverter supports the 51.2V battery architecture.
• Check the inverter’s supported CAN/RS485 BMS communication.
• Confirm the inverter’s maximum battery charge and discharge current.
• Check the required backup load.
• Confirm whether one battery provides sufficient storage for your application.
• For multiple batteries, confirm the inverter’s parallel-battery requirements.
• Plan installation in an environment suitable for the battery’s IP20 protection rating.
• Confirm warranty and serial information before purchase.

FAQs

What is the capacity of the itel IPL-51200H battery?

The battery has a 200Ah capacity, 51.2V nominal voltage and 10.24kWh nominal energy.

Is the itel IPL-51200H a LiFePO4 battery?

Yes. The battery uses LiFePO4 chemistry and Class-A LiFePO4 battery cells.

What is the itel 51 2 v 200ah 10kwh price in Pakistan?

The current price of the itel 10.24kWh 51.2V 200Ah Lithium Battery in Pakistan is Rs. 450,000.00.

How many batteries can be connected in parallel?

The IPL-51200H supports up to 32 parallel units, subject to the requirements of the complete compatible system.

Does the battery support CAN and RS485?

Yes. It supports CAN 2.0 and RS485 communication.

What is the cycle life of this itel lithium battery?

The battery-cell cycle life is more than 6000 cycles under the specified test conditions of 25°C, 0.5C/0.5C, 80% DOD and 70% EOL.

What warranty does the itel IPL-51200H have?

The battery comes with a 5-year warranty.

Is the itel lithium battery compatible with every inverter?

No. Compatibility should be checked according to the inverter’s battery voltage range, charge/discharge limits, BMS communication and supported configuration.

Buy itel 10.24kWh 51.2V 200Ah Lithium Battery from Hajvery Solar

The itel IPL-51200H is a 51.2V, 200Ah LiFePO4 battery designed for compatible solar energy-storage and backup applications. Hajvery Solar Energy can assist with battery-to-inverter compatibility checking, product verification and warranty guidance.