Jinko 585W Bifacial Solar Panel

Jinko 585W Bifacial Solar Panel Overview

The Jinko 585W Bifacial Solar Panel combines N-Type monocrystalline cell technology with a dual-glass bifacial design. It suits solar installations where high module output, efficient use of installation space and long-term energy production matter. If you are planning a solar installation, check the Jinko 585w solar panel price in pakistan and confirm the panel’s compatibility with your system design.

Its 585W rated output helps installers design solar arrays with fewer modules than lower-wattage panels would require for the same nominal DC capacity. However, the final number of panels depends on the required system size, inverter limits, roof area and electrical design.

The bifacial structure also allows the rear side to capture reflected and scattered sunlight. As a result, the panel may produce additional energy when the installation provides suitable conditions. The actual gain depends on mounting height, surface reflectivity, row spacing, shading and ground conditions, so assess each installation individually rather than assuming a fixed percentage.

For buyers comparing the Jinko 585W Bifacial Solar Panel in Pakistan, the main considerations include electrical specifications, installation dimensions, bifacial performance, warranty coverage and compatibility with the selected inverter.

Key Features and Benefits

N-Type Monocrystalline Cell Technology

The panel uses N-Type monocrystalline cells designed for efficient solar energy conversion. In addition, Jinko’s HOT 2.0 technology aims to improve reliability and reduce light-induced degradation and light-and-elevated-temperature-induced degradation.

For buyers planning a long-term solar installation, degradation performance is important because it affects the amount of electricity a system can produce throughout its operating life.

For more technical information and specifications, visit the link below:

Jinko Solar Panel Official Website

Bifacial Energy Generation

The bifacial design allows the module to generate electricity from both its front and rear surfaces. When sunlight reaches the back of the panel, the rear side can contribute to total energy production.

For better bifacial performance, use a reflective installation surface, provide appropriate panel elevation and reduce rear-side shading. However, a panel installed close to an opaque roof may receive less benefit from its rear surface.

High Module Efficiency

With 22.65% module efficiency, the panel converts a substantial proportion of the sunlight falling on its surface into electrical power under standard test conditions.

This efficiency can help buyers make better use of limited roof space. However, the final system capacity also depends on the available installation area, panel layout, spacing and inverter design.

SMBB Technology

SMBB technology improves light trapping and current collection within the module. Consequently, it supports the panel’s power output and reliability.

The practical benefit still depends on the complete panel design and operating conditions, including sunlight availability, temperature and shading.

Dual-Glass Construction

The panel features 2.0mm anti-reflective coated front glass and 2.0mm heat-strengthened rear glass. It also uses an anodized aluminium alloy frame for structural support.

This dual-glass construction is relevant when the installation exposes both panel surfaces to the environment. Nevertheless, correct mounting and careful handling remain essential during transportation and installation.

Low Power Degradation

The panel has a stated annual power degradation rate of 0.40% over the 30-year linear power warranty period. This figure helps buyers assess long-term performance expectations.

However, actual energy generation varies with environmental conditions, maintenance and system design.

Best For

The Jinko 585W Bifacial Solar Panel may suit the following applications:

• Residential solar systems where the module dimensions and electrical limits meet the project requirements.
• Commercial rooftops that require high rated power per module.
• Ground-mounted solar projects designed to benefit from rear-side light exposure.
• Installations with sufficient clearance behind the modules for bifacial generation.
• Solar installers and dealers looking for N-Type bifacial modules for suitable projects.
• Buyers comparing long-term panel performance, efficiency and warranty coverage.

When Another Panel May Be Better

Although the Jinko 585W Bifacial Solar Panel suits many projects, it may not fit every installation.

• Limited mounting space: First, check the module dimensions and available installation area before finalising the layout.
• Low-clearance rooftop mounting: A bifacial panel may provide limited rear-side gain when its back surface receives little reflected sunlight.
• Incompatible inverter inputs: Make sure the panel matches the inverter’s maximum DC voltage, MPPT operating range and current limits.
• Different project requirements: A system designed around another module size or electrical configuration may require a different panel specification.

Therefore, base your final selection on the complete solar system design rather than wattage alone.

Cell and Module Technology

The Jinko 585W model uses N-Type monocrystalline cells in a bifacial dual-glass module. Its 144-cell configuration follows a 6 × 24 layout.

The front surface receives direct sunlight, while the rear surface can capture reflected and scattered light. However, the electrical contribution from each surface depends on irradiance and installation conditions.

The panel has a reference bifacial factor of 80% ±5%. This figure describes a module characteristic; it does not guarantee that total energy production will increase by the same percentage.

Technical Specifications

Performance and Degradation

Solar panel output changes with sunlight intensity, cell temperature, shading and installation conditions. Therefore, the rated power of 585W represents performance under standard test conditions, not continuous real-world output throughout the day.

The panel’s -0.29%/°C Pmax temperature coefficient indicates that maximum power decreases as cell temperature rises above the reference temperature, assuming other conditions remain equal. To help manage operating temperature, provide suitable mounting clearance and ventilation.

The linear power warranty covers a period of 30 years, with annual degradation specified at 0.40%. For future performance claims, retain the applicable warranty terms and conditions.

Performance Considerations for Pakistan

Pakistan’s strong sunlight can create favourable conditions for solar generation. However, summer heat, dust accumulation and installation quality also influence panel performance.

Consider these points when installing the panel:

• Heat management: Provide appropriate mounting clearance and ventilation behind the module.
• Dust and cleaning: Dust can reduce the sunlight reaching the cells. Therefore, use a suitable cleaning method and follow safe maintenance practices.
• Bifacial installation: Evaluate mounting height, rear-side clearance and surface reflectivity before estimating additional generation.
• Electrical design: Account for panel voltage, current and temperature effects when selecting the inverter and designing strings.
• Shading: Avoid unnecessary shading from nearby structures, trees and mounting components.
• System protection: Use correctly rated cables, connectors, protection devices and mounting hardware.

Keep in mind that rated wattage alone cannot guarantee a fixed daily energy output.

Jinko 585W Bifacial Solar Panel Price in Pakistan

The Jinko 585w solar panel price in pakistan is an important consideration for buyers planning a new installation or expanding an existing solar system.

The final project cost depends on the number of panels, mounting structure, inverter selection, cables, electrical protection, installation labour and other system components. For larger projects, contact Hajvery Solar Energy to discuss quantity requirements and current availability.

Before placing an order, calculate the required DC capacity and confirm the panel’s electrical compatibility. This step helps you plan a suitable system and avoid configuration issues.

Tier 1, A-Grade and Product Authenticity

When comparing solar panels, evaluate product authenticity, cell technology, rated power, efficiency, electrical characteristics and warranty terms. These details provide a more useful basis for selection than wattage alone.

The terms Tier 1 and A-Grade do not automatically guarantee a particular panel’s quality or condition. Tier 1 generally relates to manufacturer bankability criteria, while sellers commonly use A-Grade to describe product grade or condition.

Before purchasing, confirm the exact model, product condition, serial information and applicable warranty coverage with the seller.

Hajvery Solar Product Verification

Hajvery Solar Energy helps buyers identify solar panels that suit their project requirements. Before ordering the Jinko 585W Bifacial Solar Panel, check the following points:

• Confirm that the model is JKM585N-72HL4-BDV.
• Check that the supplied panel matches the agreed product specifications.
• Review the product and performance warranty terms.
• Make sure the selected inverter supports the panel’s voltage and current characteristics.
• Confirm that the planned string configuration stays within the inverter’s electrical limits.
• Check that the installation structure can support the panel’s dimensions and weight.

These checks help reduce the risk of selecting an unsuitable panel or using an incorrect system configuration.

You can also verify your Jinko Solar Panel at Hajvery Solar Energy using the following product verification link.

Panel Verification Link: Jinko Solar Panel Verification

Warranty

The Jinko 585W Bifacial Solar Panel carries a 12-year product warranty and a 30-year linear power warranty.

The product warranty covers applicable product-related conditions, while the linear power warranty concerns warranted power performance over the stated period. These two warranties provide different types of coverage and should not be treated as interchangeable.

The stated annual power degradation is 0.40% over 30 years. However, warranty claims remain subject to the applicable terms, conditions and claim process. Before purchasing, confirm the relevant coverage and claim requirements with the seller.

Frequently Asked Questions

Is the Jinko 585W Bifacial Solar Panel an N-Type panel?

Yes. The panel uses N-Type monocrystalline cell technology and a bifacial dual-glass design.

What is the efficiency of the Jinko 585W solar panel?

The module efficiency is 22.65% under standard test conditions.

What is the Jinko 585W Bifacial Solar Panel price in Pakistan?

The current price of the Jinko 585W Bifacial Solar Panel in Pakistan is Rs. 22,581 per panel. However, confirm current availability and quantity requirements with Hajvery Solar Energy before ordering.

What is the exact model of the Jinko 585W Bifacial Solar Panel?

The exact model is JKM585N-72HL4-BDV.

Does the bifacial panel generate electricity from both sides?

Yes. Both the front and rear surfaces can contribute to electricity generation. However, the additional rear-side contribution depends on sunlight exposure, mounting height, shading and surface reflectivity.

What are the dimensions of the Jinko 585W solar panel?

The panel measures 2278 × 1134 × 30mm and weighs approximately 31kg. Therefore, check that the mounting structure can safely accommodate its dimensions and weight.

What warranty does the Jinko 585W Bifacial Solar Panel have?

The panel carries a 12-year product warranty and a 30-year linear power warranty, subject to the applicable terms and conditions.

Where can I find Jinko 585W Bifacial Solar Panel specifications?

Review the model’s electrical specifications, dimensions, cell technology, temperature coefficients and warranty details before selecting the panel. In addition, match the exact model when checking technical information or planning your installation.

Buy Jinko 585W Bifacial Solar Panel from Hajvery Solar Energy

Hajvery Solar Energy supplies solar products for residential and commercial projects in Pakistan. Whether you are planning a new rooftop system or a larger solar installation, confirm the required quantity, panel compatibility and applicable warranty before ordering.

Visit Hajvery Solar Energy at 280K Block J-1, Johar Town, Lahore, or contact the team for product enquiries and installation planning.

To explore more options, visit Jinko Solar Panels in Pakistan.